LLT guides have the ball circuits placed in an X-arrangement, which aids load sharing in all four main load directions and accommodates moment loads, while maintaining self-aligning capability. The arrangement further compensates for mounting deviations, even under preload.

The CK series SQUICH connectors are wired on the rear top of the insert. This keeps the wires from being bent and eliminates the disassembly process of the inserts from the enclosures when re-wiring is required.

Phoenix Contact’s QUINT CAP and QUINT BUFFER modules provide several seconds of backup time, starting at less than 20 milliseconds after the power loss, to critical applications.

LTSX03 comprises different variants like the flexibility for adding heater, blower, wiper, and built-in IR 30/60/100 m to fit a variety of installation environment. As for the pan and tilt function, LTSX03 standard product delivers 360º endless rotation and ±90° tilt which enables unlimited zero spot monitoring from limited installation sites.

Yokogawa developed the WT5000 Precision Power Analyzer to help satisfy evolving application requirements and ever-changing international standards that call for custom measurements and consistent accuracy.

The Han Gigabit module enables Cat. 7A transmission in the train car transition area. The interface is also shock and vibration resistant according to DIN EN 61373, Category II, which makes it suitable for extreme loads in the railway environment.

Various modules providing choices among motor types, gearboxes, ball screws or roller screws, and accessories allow for custom combinations of components ideally suited for an application.

his combination of packaging, temperature capabilities and choice of current ratings makes them suited for Internet of Things (IoT) applications that require compact design but don’t involve continuous high currents such as smart doorbells, thermostats, ceiling fans/lights, door locks, etc.

The Bi-Directional DC/DC converter charges a low side (12V) battery during normal operation (buck mode) and charges or assists the high voltage (48V) battery in emergency situations (boost mode). It is packaged in an 9.45” x 5.366” x 0.725” mechanically enclosed package weighing 2.86 lbs.

The 32 A per contact, 600 V power connector is constructed with 4+PE, 8 and 12 silver-plated crimp contacts.

The MCC 118 provides eight single-ended analog inputs with sample rates up to 100 kS/s for taking single point or waveform voltage measurements.

The Integrated Laser Alignment System (ILAS) of the GuardShield 450L-E provides multiple visible laser points that optimize setup with a touch of the ILAS symbol on the front window of the stick.

Using the MATLAB console or scripts it is possible to read online values directly from the control system and make them available for further calculations and evaluations

The cables are available with four unshielded (CF30 series) or four shielded (CF31 series) conductors in 16 AWG to 2 AWG sizes. Individual conductors are bare copper and stranded for flexing applications.

The VCnano3D-Z-series embedded vision systems are designed for use in OEM applications. They contain a Xilinx Zynq SoC, which comprises a dual-core ARM processor and an FPGA.

With a backlit screen, these power meters display key power system values, and direct access keys (four to six depending on the model) are used to access functions required for energy efficiency projects and electrical distribution monitoring.

SIRCOVER manual transfer switches have three stable, completely isolated positions and feature 2, 3 and 4-pole configurations; 100A, 260A and 400A ratings, with 240VAC and 600VAC max operation voltage (AC) ratings.

The REX12D-T circuit protector, in combination with the EM12D-TMB supply module that communicates via Modbus-RTU protocol, is intended for those looking to incorporate condition monitoring and predictive maintenance into their systems.

The all-rounder uses red light and lets users choose from among four sensor modes: background suppression, energetic diffuse, retroreflective or through-beam sensor. All the sensor functions can be configured over IO-Link while the system is running, so that a remote teach-in can be initiated by the controller.

The trip-free design eliminates closing the circuit during an overcurrent event. The device also isolates problems in the system while allowing for continued operation. The series complements the TMC 8 series of UL 489 circuit breakers.