Enhancements in version 3.6 firmware include motion commands, such as Jogging, Find Home, Go Home, Blended Move (1 to 4 moves), and Stop Motion. The controller can support up to four axis (65kHz pulse out and 100kHz in) of motion control and control GE Fanuc MotorCube stepper, PowerCube steppers, S2K servos or any third party stepper or servo with a pulse/direction command interface.

Viper s650 and s850 Class 1 clean room robots provide precision motion and full 6-Axis dexterity for clean room assembly, handling, testing and packaging applications.

All servo drives in this series are configurable and can drive permanent magnet brushed or brushless motors, voice coil actuators and closed-loop AC induction motors.

The SNAP PAC system includes PAC Project Software Suite, higher performance SNAP PAC brains, five SNAP I/O modules, four SNAP PAC racks, OptoDataLink enterprise connectivity software, SNAP Motion Control Subsystem, and SNAP PAC Sim, a software application that simulates a fully functioning SNAP PAC controller on a PC.

The introduction of three-phase AC drives means that users can build all-Ethernet systems with the optimum choice of motor technology for each axis, from small to large loads. Rotary and linear versions of brushless servo, and AC vector motors are all software selectable.

To keep cables separated and free from premature wear, modular separation components can be easily incorporated into any Energy Chain System. Available in both vertical and horizontal arrangements, using separation components prevents cables and hoses from chafing, twisting and corkscrewing and as a result, significantly extends their service life.

Powered by 1/20 horsepower AC motors, the four standard models in the 207 series offer torque ratings from 42 to 113 in-lbs, with 2 to 29 RPM output speeds at full load current of 1.3 Amps. Rated at 115 Volt, 60 Hertz, the 207 series employs shaded pole electric motors, with clockwise rotation as standard.

IndraMotion for Metal Forming Roll Feed system contains pre-defined, user-activated functions needed for specific applications such as roll feed and a flying cut off. All the user must do is set the length, speed and quantity parameters. One model uses standard fieldbus protocols (Profibus, DeviceNet).

Designed to make use of available ceiling space, the Cobra s800 Inverted robot is ideal for over-the-belt high speed packaging for multiple industries, including food and beverage, medical, pharmaceutical, personal care products and electronics.

ACME Threaded Shaft Collars provide optimum axial power for applications such as stroke limiting, gear and bearing nuts, or height and spring tensioning. Precision machined with right- or left-hand threads to match ACME shafts, these collars are offered in steel and stainless steel.

Miniature Ball Rail Systems are now avaialble in sizes 7, 9, 12, 15 and 20 in the standard version and sizes 9, 12 and 15 in the wide version.

Absolute SSI DuraCoder is available in either single-turn or multi-turn configurations. An optional 5/8" diameter shaft has a 100 lb radial load and a 50 lb axial load rating.

VBA family of I/O modules for AS-Interface specification 3.0 is CE marked and UL listed. It supports extended addressing with 4 inputs and 4 outputs for up to 62 nodes per network.

STAC6 220 VAC Stepper Drives provide software selectable resolutions from 200 to 51,200 steps/rev at speeds up to 50 rps. Self-Test and Auto Setup measure and configure motor parameters automatically, while anti-resonance technology eliminates midrange instability for higher motor speeds and fuller use of available torque.

The DNCE screw-driven linear actuator has a nonrotating round piston rod suitable for conversions from pneumatic to electromechanical automation. the DNCE is a drop-in replacement for the Festo DNC and other pneumatic cylinders based on ISO standard 6431.

The RHDi uses precision bearings, metal code disks, proprietary custom LED illumination, and custom Opto-ASIC circuitry. It comes with a standard 2.6” square mounting flange, and can operate in temperature extremes from 100°C to -30°C.

Quattro s650 robot has a 4-link parallel drive and carbon fiber construction to provide packaging cycle times which are twice as fast as previous packaging robots at up to 240 pick-and-place cycles per minute. Applications include light payload packaging and handling in the food, consumer goods, cosmetics and pharmaceutical industries.

Digiset 6 makes presetting boring and milling tools quick and easy with an intuitive control system and software. Digital camera imaging shows measuring results almost instantly on the on-board color display. Operators can manage up to 1,000 tools simultaneously and choose from programs that perform axial and radial runout inspection, cutting edge inspection, zero point monitoring and measurement of multi-bladed tools.

3800 Series, for use in conveyor systems that transport containers and boxes with individual weights of up to 300lb, operates with the drive components located away from the conveyor area, reducing the risk of contamination that may have adverse effects on the drive performance.

PSR softstarters offer users a full set of knob-adjustable functions for starting and stopping 3 to 45 A, three-phase motors, up to 600 VAC in a compact package that easily mounts in small control panels and equipment enclosures.