IndraDrive is a complete drive, motion control, and logic control mounted directly on the motor. It uses the motor casing surface as the heat sink. This reduces the total build space required by 50% when compared to the copmpany's traditional servo drives.

Lead screw, linear rail, spline shaft and ScrewRail actuator assemblies are available with Kerkote TFE coating, which reduces friction and extends the life of assemblies used in motion control applications in a variety of industries. Since it is a dry lubricant, Kerkote will not become dry and paste-like, and does not attract dirt or debris.

ServoClass Couplings are made with 304 stainless steel disc packs and 7075-T6 aluminum hubs and center members and have higher torsional stiffness than previous models. Applications include medical systems such as scanners, DNA analyzers and X-ray equipment requiring consistent, precision linear positioning.

Engineered to satisfy the price and performance needs of the OEM market, the ST5-S offers advanced features to obtain absolute maximum performance benefits from a stepper motor. the ST5-S can be controlled by a step and direction input, or by a host controller via serial communications.

The encoder module incorporates a lensed LED light source and monolithic photodetector array with signal shaping electronics to produce the two channel bounceless TTL outputs. The internal monolithic electronic module converts the real-time position, speed, and direction into TTL compatible outputs.

Retractile cordsets for PROFIBUS-DP networks may be extended up to four times their original retracted length. This makes the cordsets ideal for motion and robotics in automotive applications.

Recirculating and planetary roller screws provide solutions for linear-actuation applications requiring accuracy, rapid acceleration, fine leads, and high load capacities. These roller screws can sustain static loads up to 1,000 tons and dynamic loads up to 200 tons, which is three times greater dynamic load capacity than comparably sized ball screws.

TwinCAT automation software now conforms to OPC UA (Unified Architecture). The new OPC UA standard is based on TCP communication and is, therefore, platform-independent. The "Unified Architecture" specification creates the basis for new platform-independent communication and information technologies.

Food-Grade Silicone Suction Cups are available in sizes and shapes for picking muffins, cakes, and pastry directly from pans as they exit ovens or for placing completed packages into cartons. Rated for use at up to 600ºF (316ºC), these non-marking translucent vacuum cups are offered with fittings, spring suspensions, and mounting hardware.

TwinCAT Remote Synchronization library of software function blocks helps users synchronize several multi-axis machines that have TwinCAT control systems. The software allows for general time synchronization of information for distributed control to coordinate multiple machines by calculating offsets to compensate for differences in execution time and CPU clock frequencies.

Power off Magnetic Brakes (PMBs) are available in nine standard frame sizes ranging from 30 to 120, with a torque range from 45 lb-in to 4250 lb-in (5 Nm to 480 Nm), in diameters from 3.30 in. to 11.89 in. (84 mm to 302 mm). Operating voltages of 24 / 90 / 190 VDC are standard, with other voltages available upon request.

Prodigy-PCI Motion Card for multi-axis, high-performance control is available in 1, 2, 3, and 4-axis versions. The card provides advanced motion control features including trajectory generation, servo loop closure, quadrature signal input, motor output signal generation, performance trace, on-the-fly changes and commutation. Motor type can be software-selected on a per-axis basis, and includes DC brush, brushless DC, step, and microstepping.

The MotiFlex e100 three-phase AC motor drives have Ethernet Powerlink and TCP/IP connectivity, and can be used in both centralized control and distributed "intelligent drive" scenarios. The initial launch of MotiFlex e100 provides drives rated for output powers up to 16 A, in five steps of 1.5, 3, 6, 10.5 and 16 A.

ServoSoft v2.6 now has EasySize Wizard, which walks users through each step of the servo system sizing process. Helpful hints are displayed at each step. Each time the user clicks 'Next,' the main form follows the wizard so that the user can see how ServoSoft is organized and, eventually, learn to navigate without the wizard.

The low-profile Cm5 connector is designed for servomotors with a flange size less than 150mm2, offering simplified internal wiring and replacing two bulkier conventional circular connectors. The connector capable of handling up to 40A and is completely sealed and shielded for high reliability. Is simple harnessing reduces assembly and installation time in motor applications.

The SM2315DT incorporates a Servo Motor, Amplifier, and Motion Controller into the same integral frame. It has an 8-pole compact rotor with higher copper filling factor that can generate two times (2X) more continuous torque than the company's previous model. It delivers 112 oz-in of peak torque while maintaining 57 oz-in of continuous torque with a maximum speed capability of 4700 rpm.

Accepting any 24 Volt DC source including battery power, No. MMP-TM55-24V GP52-079 reversible gearmotor is rated for 80 in-lb continuous torque at 58 RPM, and 448 in.-lb Peak. The motor measures 2.14” in Diameter, by 7.7” long, and has a keyed output shaft of 12mm diameter by 25mm long.

“Smart Control Units” can synchronize the speeds of up to six different actuators and store frequently used positions for quick selection using only one command. These units have a standardized plug system (DIN8 for actuators and HD15 for operating devices), three or six channels for actuators, and adjustable operating parameters.

A smart AC motor drive allowed Centrilift Cable to eliminate a PLC and improve the productivity of winding finished cable onto drums at its facility in Claremore, Oklahoma. Centrilift Cable makes specialized cabling for the electrical submersible pumping systems used in oil and gas wells.

CmX Series connector features a simplified connection design that replaces conventional circular connectors. The low-profile connectors are 50 percent smaller and lighter than conventional circular connector designs with significantly lower installation costs.