The is Listed to UL 1449 and is available with up to 80 kA surge capacity. This line was developed specifically to conform to North American-centric voltage values and includes a variety of U.S.-based circuit configurations.

CONTA-CLIP provides KDS-FB in four frame widths and with different divisions for flat and round cables. Sealing elements are available for all common industrial cable sizes.

his technology allows FOC (field oriented control) for brushless motors without sensors from full stop to full speed under load. This HPSC uses a signal injection algorithm which determines the rotor position for a smooth startup.

The automated thread checking solution from SMAC enables a detailed inspection and verification of all parts. It also identifies tool wear, and allows SPC data acquisition for process control and quality systems.

This KADL cable entry system allows for the insertion and sealing of pre-assembled cables with connectors into enclosures, machines and control cabinets.

The switches are designed to operate in harsh environments with varying climatic and environmental conditions, and is intended for digital substations, transportation and oil & gas industries.

The MXL2 with AMP includes two components produced by GE’s Additive Manufacturing Works (AMW) teams in Birr, Switzerland, and Greenville, South Carolina, United States: the first-stage turbine vanes and heat shields.

Suitable for sensor applications including capacitive touch interfaces, the ATtiny3217 and ATtiny3216 have two Analog-to-Digital Converters (ADCs) that enable systems to implement touch control simultaneously with other analog measurements.

This three-axis gimbal mount handles loads to 10kg (22.5 lbs) and has a clearance of 300 mm x 300 mm, (11.8 in. x 11.8 in.) around the roll axis stage.

The dsPIC33CH is designed specifically to facilitate independent code development for each core by separate design teams and allows integration when they are brought together in one chip.

The TEC 3 Series consists of 32 models offering inputs of 4.5~13.2 / 9~18 / 18~36 / 36~75 Vin and outputs of 3.3 / 5 / 9 / 12 / 15 / 24 / ±12 / ±15 Vout with efficiencies of 75-86%.

The SMTS is used by automotive, autonomous, construction and off-highway vehicle OEMs and their associated steering suppliers for in-laboratory simulations of driver, road and vehicle inputs and their associated effects on steering system performance and annoying noises.

The R200 and R201 series offer photoelectric functional principles: thru-beam sensors, retroreflective sensors with a polarization filter or for clear object recognition, energetic diffuse mode sensors, sensors with background suppression and foreground suppression, measuring light barriers with two switch points, and distance sensors.

Configurations include one-pole, one plus neutral, two, three and three plus neutral, with current ratings from 0.5A to 63A, all with thermal and magnetic trip elements for overload and short-circuit protection.

The updates include extensive functionality for smart factories and energy distribution, as well as new predictive analytics calculations.

These converters are designed for healthcare products where small size and applied parts to patient (BF classification) is required.

The 1.25 pitch PicoBlade connector offers a connection in both wire-to-wire and wire-to-board applications. With four header options, the PicoBlade is intended to meet the design needs of products ranging from automotive media systems to healthcare applications.

The MAX22505 is a solution that combines USB fault protection (480Mbps) for industrial voltages, while being flexible to support either host or device applications including USB On-The-Go (OTG).

This rating applies to terminal versions with 2 or 3 pins in alternating positions per pole. These provide the creepage distances required to maintain a higher amp rating.

The SES/SEM70/90 are motor feedback systems offered in 25 mm and 55 mm diameters that use holistic sensing capacitive technology, to minimize external influences such as electromagnetic interference and humidity.