-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Industry Products
Featured Products
Scroll down to search for more products...
-
Build Smarter, More Reliable Control Systems
Struggling with downtime, data complexity or scalability? The MELSEC iQ-R PLC delivers performance, diagnostics and reliability. -
Shaping Industrial Intelligence
As factories become more connected and software-defined, Factory Tomorrow Season 6 explores the technologies driving industrial automation, AI-ready infrastructure and smarter manufacturing. -
Tune In to Tech’s Hottest Topics
Inductive Automation’s Travis Cox and Thomas Burke talk with industry innovators about AI, enterprise SCADA, IT/OT convergence, MQTT, OPC UA and more on this industrial automation podcast. -
One Sensor. Multiple Modes. More Flexibility.
One sensor, multiple operating modes. SICK MultiMode devices simplify setup, boost flexibility and adapt to changing applications. -
The Next Evolution in Process Control Is Here
DeltaV™ version 16.LTS Distributed Control System (DCS) builds on decades of field-proven innovation to deliver the most robust and reliable release yet. -
Introducing the HiveMQ Industrial Data Platform
When operational data is scattered, delayed or stripped of context, teams lack the foundation needed for trusted intelligence and governed action. HiveMQ helps connect, contextualize, analyze and act on real-time industrial data.
1,953 Products
-
igus introduces E2.1 series of energy chain
The E2.1 series offers filling of the e-chain from the side or top, along the inner or outer radius, with a chain opener or screwdriver. In this process, one meter of the e-chain can be opened in two seconds. -
Opto 22 adds IEC 61131-3 programming options in its groov EPIC edge programmable industrial controller
All IEC 61131-3 standard languages are supported by groov EPIC, including Function Block Diagram (FBD), Structured Text (ST), Sequential Function Charts (SFC), and Ladder Diagram (LD). -
Nanotec introduces CL4-E motor controller
The motion controller can be controlled via CANopen and Modbus RTU or programmed for stand-alone operation and be controlled via digital and analog inputs. -
HIMA announces HIMA Smart Safety Platform
This functional safety platform provides plant operators with cybersecurity to ensure that safety automation and critical assets are protected. -
Rockwell Automation releases Allen-Bradley CompactLogix 5480 controller
The controller is designed to reduce latency by performing real-time data collection at the machine level. Users can view control information at its source, and other information can be sent upstream to the enterprise or cloud. -
FDT Group announces Common Component update to support FDT 2.1
The release of the FDT 2.1 specification in 2018 set the FDT Group’s Industrial Internet of Things (IIoT) transformation path to connect and empower the intelligent enterprise based on industry-driven feedback across the process, hybrid and discrete manufacturing markets. -
MicroPower Direct introduces ME300RU series of DC/DC converters
Standard features include an input/output isolation of 1,600 VDC, ±1% load regulation, continuous short circuit protection and a remote on/off control input. The MTBF of the ME300RU series (per MIL HDBK 217F) is over 900 khours. -
Rotork announces bespoke plug and socket electrical connection option for Rotork IQ intelligent electric valve actuators
The plug and socket terminal cover maintains the integrity of the actuator’s double-sealed enclosure and IP68 watertight environmental protection (submersible in 20 metres of water for 10 days). -
Bronkhorst announces PROFINET interface for IN-FLOW Mass Flow Meters and Controllers
In addition to the optional ATEX approval for use in Category 3, Zone 2 hazardous areas, the IN-FLOW series can now be offered with FM approval for Class I, Division 2, which is an important feature for the North American market. -
Brooks Instrument announces EtherNet/IP digital communications for SLA5800 Series mass flow controller
Ideal for applications in life science, chemical/petrochemical research, laboratory, analytical, fuel cell, thin film and other segments, the SLA5800 Series features zero stability and high repeatability. Available with configurable multi-gas/multi-range capabilities, the SLA5800 Series offers a zero-drift specification. -
Minarik Drives introduces MDBL Series of configurable controls for brushless DC motors
On-board trim pots allow operators to set minimum/maximum speeds, acceleration/deceleration rates, motoring and regening current limits, as well as the proportional and integral feedback gains. -
Emerson introduces Performance Learning Platform automation technology training solution
The platform reinforces the competencies essential to fostering digital transformation and is intended to help close the workforce skills gap as the Industrial Internet of Things (IoT) era continues to change the way manufacturing and process companies do business. -
Microchip Technology announces MCP6V51 zero-drift operational amplifier
The device provides precision measurement while minimizing the increasing influence of high-frequency interference by offering an operating range and on-chip electromagnetic interference (EMI) filters. -
JVL Industri Elektronik A/S introduces CiA402 Drive profile and synchronization for EtherCAT
The JVL EtherCAT module is equipped with two Ethernet connectors and a built-in switch, enabling line, star, tree and ring topology without any extra hardware. The JVL EtherCAT module has several LEDs, enabling technicians and operators to get a status overview. -
EGE releases STD flow controller with aseptic Varivent F process adapter
The thermal sensor is suitable for use in category 2 hazardous areas. It detects flow velocities between 1 cm/s and 10 cm/s in water and between 3 cm/s and 200 cm/s in oil. -
Watlow releases batch processing feature for its F4T temperature and process controller and D4T data logger
The batch processing feature is designed for OEMs and end users with thermal processes who seek to collect manufacturing part processing thermal data. The F4T or D4T with batch processing automates data record entry and reports. -
JVL announces Add-on Instructions for Rockwell Automation’s Studio 5000 software setup
JVL’s closed-loop ServoStep technology ultra-high torque enables direct drive without gearing. The motor series also has current control, which lowers power consumption and allows 100% duty cycle without overheating. -
Dynatrol introduces CL-10GP Proportional Level Detector
The Dynatrol CL-10GP Proportional Level Detector and EC-103C(G) Control Unit monitor and control a precise liquid level range due to its proportional output signal. -
KEB Automation introduces COMBIVERT S6 range of servo drives
The COMBIVERT S6 is suitable for a range of servo applications, including highly automated, safety-oriented machines. The drives provide motor control in real time, integrated safety functionality and are designed in a book-style format for easier mounting in control cabinets where space can be limited. -
Optimal-Engineering Systems releases AU200-100x100 XY stages
The linear travel of the X and Y axes is 100mm x 100mm (3.937 in. x 3.937 in.), and the resolution of each axis is 20 microns(non-micro-step) or 1 micron(20 micro-steps per step motor driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns.
