The devices offer peripherals in variants for specific requirements. The data exchange is done via CAN FD, which is downward compatible to classic CAN 2.0.

GRV-CCANI-2 (serial communication, 2 channels, CAN 2.0B, channel-to-channel isolation) is the first module in the groov EPIC platform to provide hardware support for an industrial field bus. GRV-ITM-12 (analog input, 12 channels, thermocouple or millivolt) provides a temperature sensing option with two isolated zones and 6 channels per zone.

SMART-Sensor devices can be ordered with a volatile organic compound sensor that provides relevant air quality measurement for the comfort and health of building occupants.

It is suitable for determining medium to high turbidity values in a large number of applications, especially in the field of the food and beverage industry. The cleaning and sterilisation by means of CIP and SIP procedures are of course possible.

By combining OPC UA and IO-Link, Pepperl+Fuchs has opened up possibilities for end-to- end, transparent, communication from the lowest field level to the cloud.

Used in inspection labs, gas terminals, the food and beverage industry and refineries, the Series 150-Lab H2S Analyzer is capable of precision gas measurement in the low, single-digit PPB to high PPM levels.

Vert-X 1600 series sensors convert rotational angle into an analog or digital output. Measurement range is 0 to 360° with 14-bit resolution and repeatability of 0.1°. Available analog outputs are 10 to 90% of supply voltage and 5 to 95% of supply voltage. Digital interface options include SPI and PWM.

Designed for SIL-2 safety systems, the upgraded electronics provide an additional layer of safety to ensure operation. The electronics also connect to the AMEVision HMI Host Display for a graphical user interface and additional digital communications.

The KGEA-MRHPM Series (mid-range antennae) have been designed to reduce the number of antennas compared to the total number short antennas with equal or better performance reading distance and H-field around the whole vehicle.

The integrated solution offers an Amazon Sagemaker-built machine learning model optimized by and deployed with the Intel Distribution of OpenVINO toolkit, the ADLINK Edge software suite, and certification on AWS Greengrass.

The 6100 series is a fully automatic system that does not require an operator to initiate purging or pressurization. It offers optional temperature sensors that can be mounted around the motor for alarm notification or cooling. Additionally, there is automatic pressure compensation for excess leakage from the motor.

The “Enhanced Small Form-factor Pluggable” (SFP+) interface is a hot-pluggable network interface using transceiver modules to transmit and receive digital data via optical fiber cables.

WirelessHART Vanguard Gas Detectors interface with existing networks to provide continuous coverage while working to reduce the cost of detecting toxic and combustible gases

The Model 54141A complies with the VITA 65.0 3U VPX specification, it also offers analog and digital interface options for the VPX P2 backplane connector to meet system-specific requirements.

With the CMS 700i, Leuze electronic is bringing a 3D contour measurement system to market. It is based on the CML 730i measuring light curtains and can be adapted to specific customer requirements.

FCI's wet gas (WG) sensor delivers gas flow measurement in the presence of moisture and condensation droplets. Available with the Model ST80, this WG sensor can be applied for use in entrained moisture and rain-shielding applications.

The FS-3200D-10GE and FS-1600D-10GE cameras have two-channel dichroic prisms that divide the incoming light to two precisely-aligned CMOS area scan imagers.

POSITAL’s Hollow Shaft Kit encoders feature an integrated rotation counter that records each revolution the instrument experiences, even if these occur when no external power is available.

The configuration makes the OPTIV M future-ready and compatible with a portfolio of contactless and tactile sensors, software and collaborative technologies.

The Series 273 features a pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing