Industry Products

These printed circuit board (PCB) interface modules provide a means to connect field wiring to internal control and monitoring components. They can also be used to facilitate wiring among internal components.

Powered by ONSEMI’s Python image sensors, the new 16 and 25 Megapixel monochrome camera models (M4090 and M5100) are designed for industrial imagine applications

A Printed Circuit Board of only 5”x3.5” holds both, the PLC and a Touch Screen, or a switch based Front Panel with LED+LCD.

Unnamed transformers are available for Printed Circuit Board (split bobbin and low profile) and chassis mount.

USB-powered MV200UM contains a built-in white LED illumination ring for viewing circuit boards, tiny components and markings, and examining traces and solder joints on printed circuit boards.

SS361CT and SS461C Bipolar Latching Hall-Effect Digital Sensor ICs allow for the use of less expensive magnets.

LI-Q25 sensors provide up to 1 µm resolution, are unaffected by metal debris, and can replace magnetostrictive and potentiometer devices.

Micro Bear programs in ladder logic with function block using the Divelbiss PC-based EZ Ladder Lite software

SS351AT and SS451A Hall-effect sensors can be operated by a North pole or a South pole, eliminating the need for the magnet polarity to be identified.

These 3.5mm and 3.81 pin spacing miniature pluggable terminal blocks are available in 2 to 20 positions.

SS30AT is a digital Hall-effect device operated by the magnetic field from a permanent magnet or an electromagnet designed to respond to alternating North and South poles.

HIH-5030/5031 Series humidity sensor measures 0~100% RH and mounts on a printed circuit board.

The 3.81mm connectors provide the maximum degree of freedom for the design of signal terminations on the printed circuit board.

Modular MRT 20 offers a 2 and 3 position interlocking housing in 6.35mm spacing and 9.52mm spacing.

MRT 18 modular multi-level fixed printed circuit board terminal block is rated for usage in temperatures up to 110°C.

Fixed and pluggable printed circuit board terminal blocks are available in many styles.

WseM contains an A/D converter/filter, an on-board processor, and 802.11 wireless communication capability, all on one printed circuit board.

Printed circuit board terminal blocks for automation and control applications have moving clamp wire termination, UL 94V0 housings, nickel-plated copper metal parts to withstand any environment, high density and pluggability. Applications include I/O boards, motion controllers, drives, digital panel meters, flow meters, etc.

The plug comes equipped with a flange on each end that has a locking screw. The corresponding pin header, which is mounted onto a printed circuit board, is equipped with a threaded insert to which the screw from the plug is engaged. The screw-lock plug and header are ideal for those applications where vibration is a concern or where an extra level of security in the wiring connection is desired.