The input loop-powered variants include the single-channel MINI MCR-2-I-I-ILP and two-channel MINI MCR-2-2I-2I-ILP, all powered via the field-side device. Input signal to output signal is a 1:1 ratio with no conversion possible or calibration necessary.

They are designed to keep small parts or products separate or from sticking to other surfaces. Gen4 Ionizing Points can protect sensors, eliminate improper readings of sensitive electronics, keep powder filling nozzles clear of clogs and prevent jamming, tearing or dust attraction on slitting, winding, rewinding, ink jetting and silk screening applications.

ZX2 AirPlus, released earlier this year in Europe, with IEC ratings up to 36 kV is now also available in Chinese GB ratings up to 40.5 kV rated voltage and 2,000 A rated current. It is designed for primary power distribution to ensure grid reliability, efficiency and safety.

The connector transmits data and power, and was developed within the AEF (Agricultural Industry Electronics Foundation) in cooperation with all major agricultural machinery manufacturers.

The initial LogiSwitch product launch includes a series of panel-mount pushbutton switches and a beginning line of subminiature limit switches with the new technology.

The range includes SPDs that use optical monitoring capabilities to troubleshoot and diagnose a system from any location. Local and remote status indication is designed to simplify maintenance.

This recyclable, quick-connect breaker is available in three curves (B, C and D), ranges from 0.5 to 63 A and is compliant with UL/CSA/IEC standards for branch circuit protection in commercial and residential applications.

The PAC1934 is designed to measure voltage rails as low as 0V and as high as 32V. It is designed for determining power consumption and energy usage without the need for voltage or current range adjustments.

The SLDM modules fit into small spaces (2.8mm high). They can be mounted in areas on the top side where ultra-low profile is required either due to airflow impeding issues or mechanical interference issues, or they can be mounted on the PCB bottom side to save top side real estate.

ML Series sensors have a ½ inch square profile. Other key specifications include models with 6, 10, 25, 50 or 100 turns, bushing mounting and sealing to IP 65. Life is >15 million turns. Linearity is to ±0.25% of full scale range. Resolution is better than 0.1% with repeatability of ≤ 0.17%.

The MOWI20C / MQI40C / MRWI60C are families of 20 / 40 / 60 watt DC/DC Converters featuring a 4:1 Input Range in a chassis-mount package with terminal strip connections and optional DIN Rail mounting eliminate the power board requirement in field applications.

The Fluke T6 Electrical Testers with FieldSense Technology are designed to make troubleshooting safer and more efficient by allowing electricians to take simultaneous voltage and current measurements — not just detection — without test leads.

Weidmuller’s WPD blocks are designed for power source distribution in low voltage applications (UL - 600V / 30 – 310 A, AC/DC) and accommodate a range of wire sizes from AWG 14 – 3/0.

The range of Large PXI Matrix Modules (model 40-559) are 1Amp/20W switching modules, with up to 4,096 crosspoints. The matrices are available in 2, 4, or 8-slot PXI sizes and are designed for high-performance matrix requirements.

The Reed Relay Matrix solution combines Pickering’s LXI Modular Chassis (model 65-200) with their new plug-in matrix module range—providing access to all signal connections on 200 pin connectors.

S3 Semiconductors (S3semi) will now focus on industrial and communications OEMs, converting their electronic systems and boards into mixed-signal integrated circuits and delivering packaged and tested chips

SCN6 series Mechatronics Cylinders are available in stroke lengths to 300mm and 500N (51kgf) maximum thrust and are constructed using an extruded aluminum body with 303 stainless for the shaft and rod tip

Features include Remote On/Off, Output Trim, Over Temperature, Overload, and Short Circuit Protection. The operating baseplate temperature range of the RQS series is -40 to +105°C.

Designed for OEM, industrial, telecom, datacom and medical applications, and specifically engineered for use in tight spaces, the units deliver 40 W of output power with natural convection cooling.

The terminal blocks use Push-in connection technology (PT) for nominal cross sections up to 10 AWG, 28 A, and 600 V UL.