The Marathon MM 3M measures low-to-medium temperatures with more accuracy regardless of changing emissivity, and is suitable for temperature measurement in the metals processing industry.

The M10 uses the piston time-of-fall method for measuring viscosities from 0.1 to 100,000 CPS, operates from vacuum to 100 psi, and can be used for end-point polymerization in pressurized or vacuum vessels.

Ranger performs multiple types of inspections at once, such as of high speed 3D, high-resolution grayscale, and scatter. Ruler E is a fast camera that provides calibrated data for three dimensional vision inspections.

UVX-300-GC UV (ultraviolet light) luminescence sensor has a calibration function that cuts set-up time by up to 80 percent. Calibration is via software algorithms. The calibration function allows sensors to be calibrated at one time in a central location, then distributed to where they are needed.

VDM35 sensors are available in 6m diffused and 30m retro-reflective modes, and have scaleable 4-20mA analog outputs, dual discrete PNP switch points, push-button programming, Class 1 infrared laser for sensing, built-in Class 2 visible red laser for alignment, and a 5-pin M12 x 1 micro connector.

The U93 compact force transducer measures tensile and compressive forces. Typical applications include force-displacement monitoring during press fitting, clinching or riveting as well as press force monitoring.

CV-M9 GE digital 3CCD industrial progressive scan RGB color camera has a GigE Vision interface. The camera is suitable for use in semiconductor production, food sorting, print inspection and flat panel quality verification.

Mosaic added signal conditioning to its 2 x2.5 in. Wildcard embedded controllers, providing interfaces to analog sensors and actuators. Two mezzanine boards offer 4 channels of 4-20 mA inputs, 4 channels of 4-20 mA outputs, and 4 channels of 0-10V I/O.

DNA-GPS GPS receiver system adds GPS technology to PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time. Price is $495.

The sealed, IP68-rated Pro performs machine vision inspections in industrial and washdown environments. A sealed camera with a full-featured controller is priced as low as $2580.

In-Sight 5600 vision sensors have twice the processing speed and memory of the company's previous products. Standard (640x480) resolution and two-megapixel (1600x1200) models have an IP67 (NEMA 4) rating to withstand dust and wash down.

DRS26 CoreTech Incremental Encoders are now programmable, allowing users to freely program the width of the zero pulse and the number of lines from 1 to 8,192. This allows users to replace multiple encoders with a single type of encoder that can be programmed at any time, in any location, for any application.

Edgeware now comes with DualConnectPlus, which provides filtering of string, RFID, and barcode data while extracting the barcode and RFID parameters. It can simultaneously connect serial and Ethernet devices to PLCs and applications.

GF90 measures combustible hydrocarbon waste flare gases of varying compositions. It has a thermal mass gas flow sensing element with 316 stainless steel and nickel-braze construction. It also can be specified with corrosion and abrasion-resistant alloys, including Hastelloy, Monel and tantalum.

ILIM-7 Interface Module offers 8 isolated high-resolution, 16+ bit, universal bipolar analog inputs. This allows IntelliLogger models IL-80 and IL-20 to increase channel count to a possible 128 total inputs. IntelliLogger is a self-contained autonomous data collection and Web page server.

Q45H/65 Residual Chlorine Dioxide Monitor performs monitoring and control of industrial disinfection systems in water, food processing and beverage plants. It responds to chlorine dioxide with minimal interference from residual chlorine. A pH sensor can be used to allow the monitor to display both chlorine dioxide and pH measurements.

Convir Pyropen handheld infrared thermometers can measure temperatures from -20ºC to 500ºC (-4ºF to 932ºF). Measurements are made with accuracy up to ±1ºC (±2ºF).

FlowCom Model FC100 provides simultaneous flow rate and volumetric totalized flow data for Mc Propeller Series Flow Meters. The five-digit top line of the display indicates flow rate and the eight digit bottom line of the display provides volumetric flow data.

The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

MAE3 miniature absolute magnetic kit encoder provides shaft position information over 360° of rotation with no stops or gaps. The magnetic encoder can mount to an existing shaft to provide digital feedback information.