Industry Products

The 56-Series Modline 5 has a 2 micron range and temperature capabilities of 122 - 1472° F / 50 - 800° C. It is suitable for spot weld or induction heat metal treating applications, as well as lower-temperature rubber, thick plastic or textile applications.

Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications

EQuan Environmental Quantitation System coupled with the TSQ Quantum triple quadrupole mass spectrometer is a turnkey system for the analysis of pesticides, herbicides, antimicrobials and pharmaceuticals in environmental and drinking water samples.

UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply.

The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better.

The AS5140H 10-bit rotary encoder IC is qualified to AEC-Q100 and designed for applications in an ambient temperature range up to 150°C. With a resolution of 0.35 degrees, it can recognize 1,024 positions within one 360° turn, and is accessible with either a serial or a PWM (Pulse-Width Modulation) interface.

TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

MZ2Q Magnetic Cylinder Sensor has two programmable switching points. It can be taught to detect beginning stroke (retracted) and end stroke (extended) positions over a 2-in. (50 mm) stroke size. The sensor, which offers an IP 67 enclosure rating, can be completely recessed in the T-slot.

The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

T-Mac can be mounted on moving robots, machines, or parts whose position(s) need to be monitored in 6DoF (Degrees of Freedom) space. Output is 1,000 points per second with measurement accuracy of 60 microns in a measurement volume of 15m (49ft).

User-configurable FPGA modules feature conduction cooling and differential digital I/O at a cost that is suitable for many mid-level computing functions. The modules provide the ability to configure custom I/O boards using application-specific instruction sets..

The SNAP-PAC-EB1 and SNAP-PAC-EB2 I/O Processors have dual, switched 10/100 Mbps Ethernet interfaces. This built-in two-port Ethernet switch design lowers network equipment costs by making it possible to build multi-drop I/O networks over standard Ethernet cable.

MIC-3723, a 3U CompactPCI 16-bit 8-channel non-isolated analog output card, starts at $695. Each analog output channel is equipped with a 16-bit double-buffered DAC and has an auto-calibration function and BoardID switch.

ODVA DeviceNet cable is available in ODVA-compliant thick (600V-rated), which exceeds CL2 and CL3 per NEC 725.61; thin (300V-rated); and special PLTC thin, designed with 22AWG data pair and PLTC-rated (Power Limited Tray Cable), which exceeds CL2 and CL3 per NEC 725.61.

The USB-503 logs up to 32,510 voltage measurements over a 0 to 30 VDC measurement range. The USB-504 logs up to 32,000 current loop measurements in the 4-20 mA range. The tiny USB-501-LT logs up to 4,080 temperature measurements in the 14 to +122 °F range.

Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

Micro Motion F-Series Coriolis flowmeter is available with Hastelloy C-22 construction, making it suitable for use in corrosive applications where the process fluid is incompatible with stainless steel.

The GF90 Insertion and GF92 Inline Mass Flow Meters have received ATEX approval for use in potentially explosive environments classified as EExd IIC T4.

PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.