BKS Wire Draw Encoders provide high resolution (to 0.05 mm) position or distance information for linear measurement paths up to 5 m at speeds up to 3.5 m/sec, even under difficult mounting positions. Applications include presses, punching and injection machines, storage technology, wood and sheet metal processing machines, and machinery construction and medical technology.

The fiber interface extends the maximum distance between a PowerDNA I/O Cube and its host computer from the 100 meter Ethernet/100BASE-T limitation to 2 kilometers. The 2 km limitation reflects the use of standard, off-the-shelf multimode fiber.

TS400 and TS500 platinum resistance temperature detectors (RTDs) are suitable for nearly all factory and process automation applications. The sensors may be mounted directly or remotely, and sense a temperature range of -50 to 932 F.

The PCI-1739U 48-channel digital I/O universal PCI card for both 3.3 V and 5 V PCI bus signaling starts at $195. It uses Opto-22 compatible 50-pin connectors for interfacing to many signal conditioning and termination options.

The JRBS line of spur blocks for FOUNDATION fieldbus and PROFIBUS PA provides the convenience of DIN-rail mounting in a rugged IP 20 design. All JRBS products contain a selector switch for segment termination, and allow the segment to be continued for distribution of instruments in other locations with no additional accessories required.

Battery-operated and cord-free, TH800 Chart Recorder is easily moved from place to place during short-term site monitoring and testing. It is ideal for industrial facility managers who are troubleshooting hot spots and other problems with temperature and humidity conditions.

Available in DC and AC/DC models, Series 28 Sensors feature a rugged IP67 housing and highly visible LEDs for visual status indication. They offer advanced cross-talk protection, are immune to ambient light, and are available with visible red, infrared and laser light source types.

DiProPAC 32 die protection module for the SmartPAC 2 press automation control provides inputs for up to thirty-two sensors. An 8-sensor module is also available. It generates a detailed message whenever a sensor fault occurs, providing the name of the sensor, the sensor type, the nature of the fault (early, late, missed, etc.), and the angle at which the fault occurred.

SeaDAC PLC-16H digital I/O module combines high-current Form C outputs and optically isolated inputs. It has eight SPDT high-current Form C relays that can directly switch up to 6A loads at 250VAC and 100VDC. Additionally, eight non-polarized inputs can monitor 5-30VDC and provide optical isolation to protect the host computer and other sensitive equipment from voltage transients.

The mini-IPm PLUS has Ethernet, up to 4 serial ports and a built-in mix of 26 discrete and analog I/O. It is pre-loaded with open-source Linux and the IPm firmware which offers automation, control and data acquisition capabilities. For utility applications, IPm+ also includes pre-loaded software for AGA gas flow calculations and DNP-3 time stamped communications.

The XMT series of mini photoelectric sensors are available in eleven different models including diffuse reflective, focalized, polarized retro reflective, retro reflective for transparent and through beam. The sensing distance range is from 0.2 cm up to 6 meters depending on the model selected.

Q45S provides continuous monitoring of H2S (hydrogen sulphide) in wet conditions. A flexible monitoring capability allows measurements to be made either at the inlet to scrubber systems, where concentrations can run as high as 200 PPM, or at the outlet, where concentrations are ideally below 0.5 PPM. Special sensor configurations are also available for either duct insertion or flowcell use.

System 7000 acquires, reduces, and presents data from strain gages and related sensors for stress analysis testing. Users can intermix strain gages, strain-gage-based transducers, thermocouples, and other sensors including those with high-level voltage outputs in groups of eight by choosing the appropriate sensor card for up to 128 channels in a 4U-height, 19-inch, rack-mountable scanner.

These miniature, lightweight sensors consist of foil strain gages adhesively bonded to flat substrates made of metal, polymer, or composites. Hybrid sensors can be attached via mounting holes with screws, via spot welding, or via clamping. This eliminates the need for adhesive bonding by end users. The hybrid sensors are also available with pre-attached lead wires and connectors to eliminate soldering.

IP-EP200 Industry Pack I/O modules provide a user-configurable FPGA for high-performance processing of custom logic routines and a digital I/O interface supporting a variety of signal types. It uses the Cyclone II FPGA for processing user-defined algorithms and custom logic routines. With JTAG access to the SignalTap II embedded logic analyzer, engineers can easily monitor internal device operation.

UEI added complete QNX Real Time Operating System (RTOS) support for its PowerDNA series of data acquisition and control cubes. With the new PowerDNA QNX library, QNX developers can take advantage of the deterministic timing afforded by QNX. The Library may be deployed on any host computer running the QNX RTOS and connected to the PowerDNA cube over the Ethernet (10/100baseT).

WLS-TC and WLS-TEMP temperature data acquisiton systems have an RF module, which allows for wireless data transfer. Users can acquire and process temperature data for monitoring and control at distances up to 150 feet indoors, and as much as 2460 feet line-of-sight outdoors.

The kit contains four CS Series capacitive sensors, one DS-2100 WiFi display and summing device with wireless connection capability, LoadVUE software for simplifying measurement and calibration tasks using a PC, all the data cables and a 9V power adapter to connect and power the system. It can connect wirelessly to a PC using 802.11b WiFi interface.

The CQ28 programmable capacitive sensor detects liquids and bulk materials through non-metallic walls at sensing distances of up to 10 mm. A typical application is fill level detection in tanks, containers or pipe systems for all types of media (liquids, solids and powders). Its IP 68 housing ensures dependable function under almost all operating conditions.

The digital MI Series infrared (IR) temperature sensor has double the optical resolution of previous versions, optimizing its performance in difficult ambient conditions. The thermometers can achieve up to 22:1 optical resolution and withstand ambient temperatures as high as 180 degrees C without any cooling.