Ideal for applications with fragile or unstable loads, the self-tracking, fully-supported belt is an designed as a solution for handling empty containers in preparation for fill lines in food and beverage operations.

The design of the NITRA rotary actuators is ideal for general material handling and other industrial applications such as conveying, clamping, transferring parts, positioning, and controlling valves. NITRA Pneumatic Grippers are used in a broad range of general automation processes such as pick & place, material transfer, clamping and indexing.

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends infrared beams across the workspace.

The series of LED drivers with 320W output power comes in models with 12V, 24V, 36V and 48V output voltages. Different combinations of features are designed into the LNV series to suit different application requirements and energy optimization needs.

Standard cable ties are available in natural, black and five colors, have rounded edges to avoid cable damage, and are UL 94: V2 self-extinguishing Nylon rated. Stainless steel tooth Nylon cable ties (with added Molybdenum) provide mechanical strength and optimal resistance to corrosion.

Enhancing new or existing turbine meters with wireless data management capabilities, the SignalFire Flow Totalizer is ideal when an operator must check flow rates or totals in addition to tracking data in a SCADA system.

The CA80TP measures phosphorus in ranges of 0.05 to 10 mg/l or 0.5 to 50 mg/l. It has two 4-20mA outputs with the option for additional outputs including Modbus RS485, Modbus TCP and EtherNet/IP.

The fast-response detector has been certified by the approval agencies FM, CSA and UL for its detection of methane and butane in as little as 1.5 seconds.

LM76's Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; can generate 6.2 lbs [27.8 N] of continuous force and 18.7 lbs [83.3 N] of peak force, or a combined 12.4 lbs [55.6 N] continuous force and 37.4 lbs [166.6 N] of peak force on the bottom axis.

Han 16 HPR EasyCon is designed to cover all the essential requirements for a rail vehicle interface. The two-part housing provides space for cables. HARTING also provides accessories for additional tension relief and cable shield connections.

TAG-TITE tamper evident stainless steel cable lanyards securely fasten safety or LDAR lags and ensure adherence to management of change procedures. Each TAG-TITE lanyard features a unique serial number that can be associated to the device tag number within your CMMS to prevent unauthorized and undetected replacement of safety critical devices.

The Hoffman SYSPEND 180-MAX is a modular support arm system that allows users to design customized configurations to address workers’ needs without the lead time of a custom ordered solution.

The Mobrey Hydratect 2462 Water and Steam Detection System is used in a variety of applications where the detection of water or steam is vital for safe and efficient plant operation, such as boilers, steam drums and steam line drain pots.

The ABB Jokab Safety Pluto safety programmable logic controller (PLC) features a design that enables hot swapping for replacement with the removal of the old terminal caps and a push of a button.

Filter Fan Plus enclosure fans are offered in five cutout sizes ranging from 3.62 x 3.62 inches to 11.46 x 11.46 inches with 120, 230VAC and 12, 24, 48VDC models available.

Servomex announced the SERVOPRO SO2, an analyzer that uses pulsed Ultraviolet (UV) Fluorescence technology to deliver a continuous measurement of sulfur dioxide in emissions and ambient air.

The PolyOil JAR Handling Clamp acts a safety device to prevent the jar from cocking and firing. Applications for the new JAR Handling Clamp include drilling, drill stem testing (DST) jars, coil tubing and wireline applications.

Designed for high-temperature and hydrogen applications, the CGS-FlexVu UD10 system performs as a gas detector, display and controller for the detection of both hydrocarbon and hydrogen gases.

Forming part of the latest version of NUM’ Flexium+ software (V4.1.00.00), the tool management facility provides an accessible database that can either be installed on a server platform for use with multiple CNC machine tools in a large production plant, or can be used standalone on a single CNC machine tool.