January 29, 2020 - Ransohoff a division of Cleaning Technologies Group, introduced a spray and ultrasonic combination aqueous parts cleaning system. The Rotosonic will work to clean heavily soiled parts in a single machine, rather than having to purchase a spray cabinet and an ultrasonic machine separately. It is designed to give flexibility allowing utilization of a single process or both, depending on user needs. The Rotosonic is a parts cleaning machine for re-manufacturing of automotive, truck, aerospace parts and more. The machine has a payload of 300LBS and a load height of 39”. The ultrasonic tank offers 40KHZ frequency to help clean the hard to reach locations and blind holes. The Rotosonic has a footprint of 55” deep x 50” wide x 86” high.

The PSC-52LT operates in the 0° to 1000°C (32° to 1832°F) temperature range with adjustable sub-temperature ranges. It features an adjustable response time of 100ms, and is capable of measuring spot sizes from 0.24” (6mm).

The joysticks comply with the special cleaning requirements of the food industry to prevent cross-contamination, particularly when used in machines that process raw goods.

These large capacity models are available with 500, 750, and 1,000 kNm torque ranges. Available outputs include analog, digital and FM Data.

The FL500-H2 sensors monitor optical radiation emitted by a hydrogen flame in both the ultraviolet (UV) and infrared (IR) spectral ranges while at the same time rejecting false alarm sources common within industrial job sites.

The Liquiphant FTL51B can be used in storage tanks, containers, and pipes for point level detection of all types of liquids. The instrument’s vibronic sensor is not affected by changing media properties, flow, turbulence, gas bubbles, foam, vibration, or build-up.

The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V.

These devices have been certified in compliance with IECEx and ATEX directives and are suitable for use in mines, oil and gas facilities, agricultural applications, chemical plants, woodworking factories and milling operations.

Existing display options include analog process signals, load cell, or potentiometer inputs, and temperature inputs in either °F or °C from RTDs or thermocouples. All panels offer selectable decimal point location.

The FWM7RAZ01 supports IF (I/Q) output signals from 1Hz to 1 MHz enabling it to detect movement speeds from 6mm-per-second to 6km-per-second, within a 30-meter range.

Based on photoelectric Micromote technology, it features an LED sensor in a sensor head measuring 2.4 x 1.5 x 7 mm. Especially designed for use with thin end effectors, it features a controlled and focused light spot, allowing it to detect wafers a few μm thick.

All sizes of NITRA rodless cylinders have magnetic pistons and are double-acting. The cylinders have front and rear adjustable cushions and tapped end caps for mounting.

The integrated tool “surface OCR” recognizes and extracts character strings from surfaces. For that it uses either the scan data of the 3D-height map or the 2D intensity data.

The PROGENY system provides plasma treatment at 13.56 MHz and accommodates all the common gases, like oxygen, nitrogen, and argon, with high process reproducibility and uniformity.

The Eclipse is suitable for critical applications for liquid and gas delivery, medical, analytical and industrial automation requiring fine resolution and repeatability. In addition, the design allows for custom flow profiles.

The Plantweb Insight Inline Corrosion application delivers field data from Roxar wireless corrosion transmitters, providing insight into instrument health and process corrosivity.

These DC-powered (10-30V or 15-30V) threaded-barrel sensors are IP67 rated and are available with 2m pigtail cable or quick-disconnect.

The SPECTROMAXx is an OES line with more than 13,000 installations. The newest generation instrument features a more intelligent elemental analysis of incoming source materials, for in-process testing and traceability, and for final quality inspection.

Capabilities let users fine tune scaling of I/O signals, adjust excitation levels, and calibrate the bridge. Universal output supports six ranges including 4-20mA, 0-10V and ±10V. Flexible power accepts a 9-32V DC supply at the terminals and a rail power bus option can supply multiple units from a single connection or establish redundant power.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions. The 65 mm x 65 mm table has a pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05degrees and repeatability of +/- 0.01degrees.