New fully cloud-enabled, easy-to-deploy building management system gives better insight into small- to medium-sized building performance.

A complete suite of services and subsystems from Swagelok is designed to help fully optimize critical gas distribution systems in industrial facilities.

Now offering an expanded library of 38 refrigerant gases, including Ozone Depletion Potential (ODP) and Global Warming Potential (GWP) refrigerants, the precision MSA Chillgard® 5000 Refrigerant Leak Monitor is the industry’s most sensitive and selective device of its kind that meets ASHRAE 15 and other safety, environmental, and building code requirements.

Powerful new tools help companies easily navigate the digital space in an unpredictable world.

This tester uses nine measurement device networks to simulate the human body interacting with equipment under test. Leakage current testing is needed to ensure that products comply with specific standards and regulations such as IEC, UL, JIS, etc.

Pepperl+Fuchs now offers globally certified enclosures and stocks several standardized sizes of explosion-proof ATEX, IECEx, and North American certified EJB and EJBX enclosures.

The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments.

These products are suitable for Category 6a, 7 and 8 networks, industrial monitoring and control, test and measurement, field installations and repair, and I/O connectivity.

The cable is in compliance with TIA 568-C.2 and TIA 1005, and is UL Type CMX OUTDOOR - CMR, CMX and UL AWM Style 2463 (80°C, 600V) rated.

Microchip’s MDA3KP TVS diode array family – the only available technology offering a comprehensive voltage range tested to a high reliability standard and qualified based on the MIL-PRF-19500 JANTX level equivalence standard – provides an integrated multi-diode solution.

The TTC-6P-4 pluggable SPDs protect against overvoltages on four conductors in a width of only 6 mm. That is only 1.5 mm per conductor.

With the Subsea Clamping Cylinder for fully automatic Bend Stiffener Connectors (BSCs), Bosch Rexroth has designed a system for clamping forces, powerless holding operation, and installation with no need for manual work by divers.

The series meets the technical requirements set down in the latest standards for stationary energy storage systems (incl. UL 4128) and offers users reliability for connected units. The series features housings with space for a heavy-current contact up to 200 A.

The TEA line consists of three unregulated 1 Watt DC/DC converters offering 5V input (±10%) and 5 V @ 200mA outputs. The three distinct models are: TEA 1-0505 is a SIP-4 model with 1500 VDC I/O Isolation; TEA 1-05050E is a SIP-7 model with 1500 VDC I/O Isolation; and the TEA 1-0505HI is a SIP-7 model with 4000 VDC I/O Isolation.

Dinkle’s DPT DIN rail series terminal blocks provide access, DIN rail mounting with no tools required, and push-in design to ensure secure wiring connection while reducing time and tools required for termination.

The WM15 is a Class 1 (kWh) 3-phase power analyzer which can be used for single, two and three phase systems, as well as wild-leg systems. It can measure most relevant instantaneous electrical variables, energy consumption, and harmonic distortion.

COPA-DATA has upgraded zenon's IoT functionality with zenon Service Grid, which comprises a system of modular software components, or microservices.

The applications are numerous, and they all build on the idea of temporarily storing the excess or necessary electrical energy largely independently of the grid.

The LR2 line reactor series adds seven frame sizes to match all GS, DURApulse and WEG drives. VTF series output filters combine line reactor and resistor-capacitor filter circuit to provide protection against voltage wave reflection, especially on long motor cable runs up to 1,000 feet.

Based on a convection-cooled design, the Lyte series operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. It allows cold start at -30°C even in extreme condition. The overcurrent protection is designed to operate in constant current mode, which makes the product suitable for inductive and capacitive load applications.