Magnum Secure Networking Framework (MSNF) consists of functional building blocks and secure networking protocols.

The module has two inputs for connecting a non-contact Type 4 safety device, powers safety light curtains, and connects standard PNP sensors for muting applications.

The CK32IS handheld computer has ATEX and IEC ratings, so it can be deployed anywhere in the world.

Presence sensing mats combined with a safety mat controller improve productivity while providing access guarding. Less downtime occurs because it is not necessary to set up or remove mechanical safety barriers during operation and maintenance.

Program allows users of the Tricon TMR SIS to upgrade without re-commissioning field loops or performing safety system recertification.

Nsauditor enables IT personnel to audit and monitor network computers for possible vulnerabilities.

Dual channel barriers provide intrinsic safety for hazardous area applications in refineries and chemical plants.

PES42P edge switch supports up to four access control devices as well as a fiber trunk back to a central control point. This makes the product suitable for applications such as traffic monitoring and access control.

MS4800 is available in Advanced, Standard and Basic versions to optimize the cost of safeguarding design. The MS4800 enable users to purchase as many features they need, without paying for those they don't.

The wireless version of the ViSeLink vision sensor sends image analyses, security alerts and responses at low data rates between a moveable camera and a PC or network gateway via Bluetooth.

Scalance S industrial Ethernet security modules provide the protection of a firewall and virtual private network (VPN), allowing only real-time, authenticated communication between authorized devices within the automation network.

Honeywell SIS-Health Monitoring toolset monitors the health and reliability of safety instrumented systems (SIS). The toolset can be customized for specific plant requirements, conditions and process demands.

ExN 425/437 and ExN 1325/1337 series rotary encoders for electrical drives have an EnDat 2.2 digital, bi-directional interface in order to be a part of a safe drive. Encoders for safety-related applications are inspected for compliance with ISO 13 849-1 (which replaces EN 954-1) and IEC 61 508.

Grace Technologies is pleased to announce the new ChekVolt allows users to test for absence of voltage and provides voltage presence LED indication; all without opening enclosure doors.

The e-stop station comes with a red actuator and a yellow enclosure to meet international and domestic requirements. The red switch on a yellow background normally reserved for e-stops meets OSHA, NFPA 79 and ISO 60204-1 requirements.

The actuator lifetime monitoring system continuously tracks the service life status of actuators while in operation and signals when actuator replacement is necessary. This enhances the reliability, safety, and availability of actuators used in industrial equipment applications.

The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

HP2008 hinge-operated safety interlock switches are suited for use on smaller guard doors. The switches are available in solid or hollow shaft versions and provide force guided contacts with tamper-resistant operation. A NEMA 6 enclosure enables them to withstand water washdown cleaning while providing a minimum of four million actuations

U.C.ME-OPC offers alarm import from iFix, Cimplicity, InTouch, RS-View32 and Citect. This enables users to import alarms that are already defined in their SCADA/HMI software.

The switch supports up to eight 1 GB ports in a compact 1U rack-mount switch. The switches can manage both high priority streaming traffic, such as security cameras, VoIP, and identity scanners, and the bursty data traffic typical of manufacturing operations.