-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Industry Products
Featured Products
Scroll down to search for more products...
-
Turn Data Into Continuous Improvement
Disconnected systems slowing you down? Learn how GENESIS unifies data to support smarter, more efficient operations. -
The Next Evolution in Process Control Is Here
DeltaV™ version 16.LTS Distributed Control System (DCS) builds on decades of field-proven innovation to deliver the most robust and reliable release yet. -
2026 State of Industrial AI Report for Manufacturing
Cisco's 2026 State of Industrial AI Report, surveying 350+ manufacturing professionals across 19 countries, explores how firms adopt AI, secure networks and scale operations.
1,103 Products
-
WAGO releases 750-882 Ethenet 2.0 Redundancy Controller
750-882 provides simultaneous redundancy by operating over two networks, which are accessible via two different IP addresses and MAC IDs. -
Rockwell Automation adds EtherNet/IP to CENTERLINE MCCs
The Ethernet connection allows CENTERLINE MCC users to access information remotely. -
Belden updates HILCOS WLAN Firmware
Ehancements include the ability to integrate Hirschmann Access Points and Clients into Siemens’ Step 7 (Profinet) and Rockwell’s RSLogix 5000 (Ethernet/IP) automation software. -
Siemens introduces Simatic RF200 compact RFID readers
Simatic RF210R, RF220R and RF260R are for applications in intralogistics and assembly lines where low to mid-performance range is necessary. -
Festo introduces CPX-FVDA-P Profisafe shutdown module
The CPX-FVDA-P is an electronic module for the CPX terminal, which works with the Profisafe fieldbus protocol. It can be used with Profinet bus nodes -
NORD introduces PROFINET control cabinet inverters
The PROFINET box connects a large number of inverters to a single bus line, with no need for repeaters or additional bus master interfaces. -
Mobiform Software enhances Status Vision Designer
Enhancements in V4.0 of the HMI/SCADA software include support for Microsoft Active Directory using the LDAP protocol to control who has access to different parts of the project. -
Trebing + Himstedt announces TH SCOPE diagnostic software
The software displays diagnostics for PROFIBUS, PROFINET, and other Ethernet protocols, through the combination of the web-based TH SCOPE and the network access point TH LINK. -
Hilscher releases netLINK PROFIBUS-DP to PROFINET Proxy
netLINK PROXY integrates any PROFIBUS-DP Slave device into any PROFINET network. By mounting the netLINK directly on the Profibus-DP D-sub connector, the netLINK plug operates as a PROFINET IO-Device. -
TURCK announces CAT6 RJ45 Field Wireable Ethernet Connectors
Whether connecting a peripheral device, repairing/replacing a cable link or extending the network cable, the connectors allow an on-site assembly with no special tools. -
Hilscher introduces netTAP 50 protocol converter
The netTAP 50 features ten possible protocol conversions that include PROFIBUS-DP, DeviceNet, CANopen, CC-Link, PROFINET, EtherNet/IP, Modbus TCP/RTU and ASCII. -
Hilscher announces netBRICK gateway for harsh environments
The IP67 gateway utilizes M12 connectors for connectivity to industrial automation networks like CANopen, DeviceNet, PROFIBUS, CC-Link, EtherCAT, Ethernet/IP, Modbus TCP, POWERLINK, PROFINET, SERCOS III, MB/RTU, ASCII, RS232-, RS422, and RS485. -
Beckhoff releases IP 67 EtherCAT Box with Analog IO
EP4374 I/O box is a flexible, moisture and dust-resistant EtherCAT I/O solution that combines two analog inputs and two analog outputs into one device. -
Kepware enhances KEPServerEX (version 5.5)
Enhancements in KEPServerEX version 5.5 include SNMP Agent capabilities, which allows Network Management Systems (NMS) interoperability with industrial automation equipment. -
Open Automation Software enhances Systems.NET SCADA software
Enhancements in V4 include support for 32 and 64 bit Windows operating systems, expanding the amount of real-time data supported from each server to 1,000,000 tags. -
ABB announces FECA-01 EtherCAT Adapter for drives
The FECA-01 supports CANopen over EtherCAT (CoE) protocol for CS355 and ACS850 drive families. -
Software Toolbox announces version 7 of Cogent DataHub
Enhancements include the ability to switch between redundant OPC servers to store real-time histories of millions of data changes per second and display trend graphs of data points in real time. -
Jemmac Software enhances OPCFailover
Version V2-1 includes support for Microsoft's latest operating systems as well as support for OPC redundancy for workgroup nodes and nodes in untrusted domains. -
HMS introduces EtherNet/IP and CANopen Anybus X-gateway
X-gateway enables system integrators to easily transfer I/O data between automation devices on EtherNet/IP and CANopen. -
Beckhoff Releases BK9055 EtherNet/IP Bus Coupler
The BK9055 couples EtherNet/IP with Beckhoff's modular Bus Terminal system. Characterized by slim housings and cost-optimized design, the prices is $235.00.
