VRX actuators are designed for use in material handling, part feeding and clamping, pick and place operations, cutting and many other industrial automation applications requiring rotary motion.

TFX replaces obsolete Bailey 3 Series Stepper Motor Drive modules for valve actuator positioning.

The 3824 operates in a pressure range of vacuum to 200 psi, and has an ambient temperature range of -10°C to +50°C.

D70 Series seal withstands severe process applications and comes with a backing plate that will prevent the diaphragm from rupturing if the pressure sensing instrument fails.

LS-C41 has a high-speed, high-accuracy analog PID controller, paired with an efficient PWM-based valve driver.

Series 53 A10VO medium-duty axial piston variable pump (250/315 bar) combines electro-proportional controllers with control electronics.

WIM45 provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders.

Tip-Seal manual valve is used in repetitive fluid dispensing applications where operators dispense short segments or long beads of material in adhesive bonding or sealing applications.

The system offers local and remote diagnostic alerts to warn personnel of any impending trouble with the valve/actuator or the valve communication and control terminal.

Actuator ensures constant and precise valve position in either the open or closed setting when electrical power is off.

Power Engineering International, October 2008 By Tim Probert Technical failures in the power industry are not only difficult to avert but also extremely costly. To ensure the availability and reliability of steam turbines for power generation, this monitoring and testing system, based on hydraulic triple-redundancy, protects against undesirable turbine switch-offs.

The Class F grommet enclosure is part of a conventional coil construction, which includes a taped, wrapped coil, and two-wire 18” leads.

JV vacuum pumps can be integrated into pick-and-place, automation, and small robotics equipment. Price: $9.98.

Servo-Flo 608 meter-mixes and dispenses 2-component materials for high speed dispensing applications.

As soon as the desired level of vacuum has been reached at the suction gripper, the vacuum switch sends a feedback so the workpiece to be transported can start moving.

GX valve can control the temperature of water, oils, steam, and other industrial fluids.

PDS-100 has a range from 500 nanoliters per dispense to 2 liters per minute continuous flow, and will accommodate pumps of fixed and adjustable displacement.

High-capacity process pumps meet the demanding flow and vacuum requirements in air/gas sampling and analytical instrumentation applications.

Voice Coil Actuator provides improved consistency and precision in valve control and beam steering applications.

Redundant diaphragm arrangement creates an effective safeguard to contain gases without risk of escape, even in the unlikely event that the primary diaphragm becomes damaged.