This receptacle with disconnect switch provides a secure power connection for portable or stationary electrical equipment in flammable locations.

The plastic clamps can be attached to the arm of the robot by a screw connection. The triflex R is attached to the clamp by a clip and fixed. The clamps are suitable for cobots from Universal Robots, TMS and Kuka LBR iiwa robot arms.

UtiliTrak is constructed with DualVee Motion Technology in vee and vee/crown designs, and using MadeWell Crown Rollers, and are designed for commercial applications.

The 15 and 20 watt models feature 5,940 VDC I/O isolation / 8,000 VDC peak isolation up to one second in a 2.00 x 1.00” footprint. All models feature a 1,000 VAC working voltage and common mode transient immunity (dv/dt) of 15kV/μs.

These connectors are designed for use in data centers, industrial/manufacturing automation cabling, institutional applications, office networks and PoE+ applications.

Powered by a 6th/7th generation Intel Core i socket-type (LGA1151) processor with Intel Q170/H110 chipset, equipped with 2/4 PCIe/PCI slots for integrating add-on cards, and compatible with Microsoft Windows 7/10 operating systems, IPC-220/240 provides the system for traditional legacy control operations and industrial automation applications.

Fabricated from GRP (glassfiber reinforced polyester) materials, the enclosures provide dust- and water-proof environments to protect remote control equipment located deep inside processing areas.

The black Thermoplastic Elastomer (TPE) cable outer jacket is flexible and resistant to sunlight, oil, and moisture penetration; making the cables suitable for wet and dry indoor and outdoor locations.

ABB’s UNITROL 1000 series is an excitation product that is fully compliant with the European grid code pioneered in Germany. Compliance of ABB UNITROL 1000 devices to the German grid code (VDE-AR-N 4110 and VDE-AR-N 4120) has been validated by the TÜV NORD certification body.

The system, called micro flizz, can be used with igus’ smart CF.D system, which monitors the data transmission characteristics of the cable in advance and promptly warns of a failure.

The series is comprised of 18 models offering 9-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 VDC.

The design allows users to receive the drive in one shipment with secondary windings already connected. In addition, no rear access is required=.

The ProSense conditioners operate on 21.6 to 253 VAC or 19.2 to 300 VDC supply voltage and provide 3-way isolation between input, output and power.

Falcon’s SSG-RP-1H is an extreme-temperature online UPS with features specifically designed for applications in harsh environments that are subjected to heat, dirt, dust, moisture, etc.

On the input side, the module can be used for isolating four-wire powered devices, or for powering and repeating the signal of two-wire field devices. The two outputs are isolated 1:1, 4-20 mA with the HART communications signal intact.

High-vacuum resistance style limit switches with 3-micron repeat accuracy are a choice for installations inside a vacuum, such as environmentally controlled manufacturing processes.

Introducing a new addition to the size 21.21 metal housings from ILME! The new MKAX-IF bulkhead mounting base is designed for ease of installation with the convenience of a round mounting thread.

The Series 813 M12 L-coded connector is a panel-mount connector with single wires. (Standard wire length is 200 mm; other lengths are available upon request.) The screw locking mechanism meets the IEC 61076-2-111 standard.

The XC2 includes safe torque off (STO), a data array consisting of over 4 million 32-bit elements, dedicated home and end-of-travel limit inputs, and an enhanced current sense device. Encoder support includes square-wave, sine-wave, and absolute encoders.

These transformers are open style units in ratings from 50VA up to 5000VA. Units from 50VA to 3000VA (30 amps) include molded terminal blocks.