The sensing solution detects flammable hydrocarbon gases in oil and gas refineries, manufacturing plants and mining environments.

The FL5000 Flame Detector is first in Industry with Bluetooth connectivity for ease of use to enhance safety operations.

Process and safety engineers who need a full-featured fire and gas system with built-in cloud-ready capabilities will find the advanced, next-gen HazardWatch FX-12 Fire & Gas System from MSA Safety delivers peace-of-mind and security when it comes to reliable plant safety monitoring.

The FL500 UV/IR Flame Detector from MSA Safety offers dependable fire protection in crowded plant environments with its fast-response sensor and wide field-of-view (FOV).

Engineers seeking a cloud-ready fixed gas and flame detection monitoring solution will find that the highly reliable, proven FieldServer FGFD ProtoAir Gateway from MSA Safety provides them with an intelligent, dependable, flexible, advanced technology answer to process and plant safety.

The FL500-H2 sensors monitor optical radiation emitted by a hydrogen flame in both the ultraviolet (UV) and infrared (IR) spectral ranges while at the same time rejecting false alarm sources common within industrial job sites.

OptiPMD's design and size makes it suitable for mobile lab applications. It also includes safety standards including an optical flame detector, a built-in fire suppression system, and quality control functions, which allow users to enter specification limits by product.

The FL500 optical flame detector is FM performance approved for six different fuel sources: butane, ethane, heptane, methane, methanol and propane.

The new line incorporates a variety of flame detection technologies that will provide coverage for a wide range of process industries, including upstream oil and gas installations, chemical plants, and refineries.

FM Fire-Safe Shutoff emergency block valves prevent or thwart catastrophic losses. Too frequently small accidents become major losses when fuel continues to flow in an emergency situation. When used correctly, these FM Fire-Safe Shutoffs keep hazardous materials from entering an area with an existing fire, saving major losses, and possibly even lives.

SmokeWatch has explosion-proof rating for Class I / Division 1 Locations, 0-20mA and relay outputs, and IP44 ingress protection.

The enhancements strengthen the X3301’s coverage in three ways: detection distance, detection area and detection of more fuel sources.

ASH Module manages inputs/outputs between the Eagle Quantum Premier Safety System and devices in non-hazardous areas, such as living quarters and control rooms.

3600-L/LB monitors for flames by sensing the radiant energy of the flame in a short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum.

HART protocol permits remote access to the configuration, diagnostics, as well as maintenance and alarm records of any networked Net Safety flame detector.

RS-485 and HART outputs provide status, alarm, fault, and other information for operation, troubleshooting, or programming of the units.

With HART, workers can can configure or change device settings on X9800, X2200, and X5200 flame detectors.

FL3111HT UV Flame Detector operates in temperatures up to 257ºF and recognizes a flame within 100 milliseconds.

Multi-Spectral Infrared (MSIR) FL4000 Flame Detector is now available with HART communications.

TL105 Test Lamp provides a high-energy, broadband radiation source that emits sufficient energy in both the UV and IR spectra to activate UV or IR flame detectors.