PACSystems Safety Controller enables SIL2 designs with pre-built templates for reliable performance in demanding, safety-critical applications.

The ST100A transmitter’s outputs are a match to existing plant DCS, PLC, SCADA, recorder or alarm systems.

The intelligent DC emergency power supply UPSI-2412DP3 from Bicker Elektronik, Donauwoerth/Germany, reliably protects safety-relevant 24VDC applications against system failure and data loss.

The FLEX 5000 safety I/O provides device monitoring and functional safety protection for process applications.

The intelligent DC emergency power supply UPSI-2412 from Bicker Elektronik in combination with suitable LiFePO4 or Supercap energy storage devices, reliably bridges power failures and brownouts, so that the uninterruptible 24 VDC power supply of process-relevant systems is guaranteed at all times.

Lenox Instrument Company introduces a FireSight Explosion-Proof Camera System that provides real time color video monitoring and digital recording capabilities of the inside of hazardous area process/fired heaters found in gas plants, oil refineries and petrochemical plants.

The METTLER TOLEDO Thornton 3000CS Analyzer provides on-line, trace-level chloride and sulfate measurements for corrosion control.

The blower monitoring solution uses a pre-engineered application and networks of wireless or wired instruments that lower implementation costs and provide an early warning system for operations and maintenance staff.

The JFTOT IV is listed in Table 1 of ASTM D3241-13, “Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels,” as an acceptable instrument model.

BMS300F and BMS 151F systems comply with NFPA, IEC, and ANSI/ISA standards for single or dual fuel applications with single or multiple burners.

Viewing high-resolution, color images, operators can monitor and control the recovery boiler smelt bed for growth, shape and optimal lower furnace operation.

BMS helps minimize risks while enhancing safety in process and control facilities by automating combustion permissive sequences during start-up, shutdown and dynamic transitions.

One Series is now available in explosion-proof pressure and temperature models for Division 1 (Zone 1) and Division 2 (Zone 2) areas.

Series BTO with transmitter output eliminates the need for a separate thermometer and transmitter.

The Ovation SCADA system features monitoring, control and diagnostic functionality that optimizes wind farm operations.

Emerson Process Management has significantly reduced the number of unplanned shutdowns at the Mondi Business Paper's Richards Bay Mill, South Africa, using Emerson's CSI 4500 Machinery Health Monitor. The online system detects changes in fan behavior, alerting the operators and prompting a remedial response that prevents unexpected fan failures and boiler shutdown.