Author Profile

Designing a pushbutton that will satisfy NEMA requirements while maintaining the value you've come to expect from AutomationDirect is not an easy task. We took advantage of the experience of Cutler-Hammer engineering to take existing product technology and make it better. We proudly carry the HT800 line of 30 mm pilot devices from Cutler-Hammer.

AutomationDirect offers a full line of operator consoles and consolets designed to house electrical and electronic controls, instruments, push-buttons, pilot light and operator interface systems.

AutomationDirect offers electromechanical motor control solutions for motors up to 40 horsepower at 480 volts.

Grace Engineered Products announces the GracePort™ “M5 Series” line of Stainless Steel Interfaces specifically suited for the Drug, Food Processing, Dairy, Chemical and Petro-Chemical Industry.

The MS-880 is the ideal scanner for facilities looking to simplify equipment purchase by selecting one scanner model throughout the floor for a variety of uses.

Designed for embedded applications, the MS-3 series meets demanding space and budget requirements while offering an exceptional feature-set. The MS-3 series are the fastest, smallest bar code scanners available.

Quadrus EZ™ simplifies 2D reading. Fully featured to read linear bar codes or 2D symbologies in static or dynamic applications, it is ideal for any company considering the transition from bar codes to 2D symbols.

Improve product and data tracking within a single manufacturing line or throughout and entire supply chain. Omron’s advance Auto Identification solutions offer the durability and advanced function you need.

The WinPLC is a revolutionary product that brings the best of the PC controls and the PLC world to a common platform.

AutomationDirect's Terminator I/O line of field bus termination I/O products, a practical solution for remote I/O, PC-based control and distributed control applications.

This product line has the widest variety of I/O modules and configurations of all our PLCs. You can build a control system with local/distributed I/O of up to 3,500 points. Use the built-in PID instruction or specialty modules to perform cost-effective process control. Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply are offered.

The DirectLOGIC 06 (DL06) programmable logic controller (PLC) is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06 micro PLC, you can use the same PLC panel layout for all applications from 36 to 100 I/O.

If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. In fact, all you need to do is pick out a CPU, plug it in the first slot of the base you choose, and then mix and match various modules into the available slots.

AutomationDirect carries Cutler-Hammer E26 Series Stacklights which come in preassembled 2 or 3-light units, or put together a stack of your own with five colors and alarm and strobe modules.

AutomationDirect offer hundreds of different NEMA cabinet enclosures, including junction boxes, wiring troughs, wall mount and free standing...all at AutomationDirect's low prices!

All sizes of NITRA rodless cylinders have magnetic pistons and are double-acting. The cylinders have front and rear adjustable cushions and tapped end caps for mounting.