©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Joel Don
345 Results Found
-
FeatureAutoQuiz: Loop Tuning Terminology for Change in Amplitude
The common method of judging tuning is known as the "quarter wave decay" method. It has been shown if a loop is tuned so the oscillation decays with each wave being one quarter of the previous wave, i -
Feature
AutoQuiz: Industrial Applications for Nonincendive-Rated Field Wiring
Nonincendive is allowed in Class 1, Division 2; Class 1, Zone 2, and Non-hazardous rated areas. Use in higher hazard areas, such as Division 1, Zone 1, or Zone 0 areas, is not allowed. -
FeatureAutoQuiz: Standard Wiring Color for Type K Thermocouple
Type K (chromel–alumel) is the most common general purpose thermocouple with a sensitivity of approximately 41 µV/°C. -
FeatureAutoQuiz: What Is the Liquid Flow Condition Where Falling Static Pressure Causes Formation of Vapor Bubbles?
The first stage of cavitation is the formation of vapor bubbles within the liquid system because of the fluid's static pressure falling below the fluid vapor pressure -
FeatureAutoQuiz: What are the Advantages and Disadvantages of RTDs?
Resistance temperature detectors require a temperature transmitter to function. This is not a disadvantage of an RTD, since its function does not require a temperature transmitter to be installed. -
FeatureAutoQuiz: How to Interpret Relay Logic for a Pump Control Switch
When a pump control switch is in auto, the storage tank low level switch or the pressure tank high level switch can stop the pump. -
FeatureAutoQuiz: How to Diagnose Industrial Pressure Sensor Errors
If a pressure sensor/transmitter is giving a non-linear response, replacement of the sensor and/or the transmitter will be required. -
NewsBook Excerpt + Author Q&A: Mission Critical Operations
Mission-critical specialists are in-demand in a variety of critical infrastructure areas, focused on events that could result in serious consequences, such as loss of life, harm to the environment or -
FeatureAutoQuiz: Motor Shaft Speed Relationship to Frequency and Number of Poles
The shaft speed of a motor is directly proportional to the frequency and is inversely proportional to the number of poles. -
FeatureAutoQuiz: How to Measure Tank Differential Pressure
A tank level is measured using a differential pressure transmitter (DPT-1) and a bubbler tube. The tank is vented to atmosphere. -
FeatureAutoQuiz: Nonhazardous Pressurization Systems
A Type X pressurization system reduces the classification within the enclosure from Division 1 to nonhazardous and, therefore, permits the use of ignition-capable equipment inside the enclosure. -
FeatureAutoQuiz: Identify the Function of a P&ID Symbol
In a P7ID diagram, a "circle" enclosed in a "square" indicates it is an instrument that has a shared display or a shared control. -
FeatureAutoQuiz: What Is the Best Location in an HMI for the Graphic Display of a Distillation Column?
A distillation column refers to one piece of equipment in the distillation process, which will contain several loops. -
FeatureAutoQuiz: Can You Identify the P&ID Symbol?
A "circle" enclosed in a "square," which indicates it is an instrument with a shared display or a shared control. -
FeatureAutoQuiz: What Is PID in a Control Loop?
The PID term as described refers to the loop control technique used in controllers. A PID control loop includes proportional, integral, and derivative functions to control the process. -
-
FeatureAutoQuiz: Can You Identify Instrument Line Symbols?
ISA-5.1-1984 (Revised 1992) - Instrument Symbols and Identification. -
FeatureAutoQuiz: How to Minimize Electrical Interference with AC Power and DC Signal Wiring in a Control Panel
Crossing the wires at 90 degrees will minimize the exposure of the wires to each other and therefore minimize the effects of interference. -
FeatureAutoQuiz: What Is an Industrial Process Variable?
The controlled variable by definition is the variable that the control system attempts to keep at a "set point" value. -
NewsBest ISA Webinars of 2017
An ISA roundup of some of the best educational industrial automation industry webinars presented in 2017.