June 17, 2016 - JTAG Technologies – a specialist in board (PCBA) test solutions based on JTAG and IEEE 1149.x standards, announce a family of hardware adapters specifically designed for testing of a variety of DIMM & SODIMM sockets (sizes and styles) using a JTAG/boundary-scan controller and supporting software.
The JT 2127-Flex system from JTAG Technologies is designed to help clients get diagnostics from a known-good test interface so they can ensure that the socket is soldered correctly (or not).
Modular System
The JT 2127-Flex system comprises two basic elements.
- A multi-channel IO module – JT 2127/DMU
- A personality adapter for the chosen DIMM type – JT 2127-Flex xxx.
The combination of the DMU and Flex adapter allows test signals to be sent to and from the boundary-scan source device on the UUT performing a thorough check for open pins and short circuits. In addition the voltages on the power pins of the DIMM socket are also measured. Currently supported DIMM types are xxx = 204-3, 244-mi3, 260-4 & 288-4. Due to the modularity of this test system other DIMM formats can be supported upon request.
Software
Software support for test developments is provided through JTAG Technologies ProVision developer tool-suite, which is shipped with a full set of support files for the new system. Completed DIMM socket test applications will also run on the full range of PIP runtime software modules and symphony systems where appropriate.
