June 30, 2009 - New Zealand load cell manufacturer PT Ltd. introduced Wash Down Stainless Steel Single Point Load cells in 4 various Models. The Load cells are available from 6kg to 2000kg capacities. More details about the individual models being as below:The PTSSP6-AW is a fully welded stainless steel construction single point, sealed to IP68. Rated for capacities from 6kg to 60kg, with C3 accuracy class.
Designed and built for minimal sensitivity to off-center loading common with single point use. Replaces many similar style cells such as Sensortronics model 60064, RTI model HPS etc. Optimized to offer superb accuracy right through the capacity range and recommended for use on platforms up to 300mmx300mm. Single-point platform scales, check weighing scales, bench scales, hopper scales and net-weighing units plus a variety of conveyor style scales.The PTSSP6-GW is a fully welded stainless steel construction single point, sealed to IP68.
Rated for capacities from 200kg to 500kg, with C3 accuracy class. Designed and built for minimal sensitivity to off-center loading common with single point use. Directly replaces many similar style 4 x M8 mounting hole stainless steel models. Optimized to offer superb accuracy right through the capacity range and recommended for use on platforms up to 600mm x 600mm.
Single-point platform scales, check weighing scales, bench scales, hopper scales and net-weighing units plus a variety of conveyor style scales.The PTSSP6-N is a stainless steel construction single point load cell, sealed to IP67. Rated for capacities from 15kg to 200kg, with C3 accuracy class. Designed and built for minimal sensitivity to off-center loading common with single point use. Directly replaces many similar style standard aluminum cells such as the PT2000, TH1040 and many others.
The small physical size, combined with its high accuracy and low cost, makes this cell ideally suited for retail, bench and counting scales. Optimized to offer superb accuracy right through the capacity range and recommended for use on platforms up to 400mm x 400mmThe PTSSP6-F is a high capacity stainless steel single point load cell, sealed to IP65. Interchangeable with our aluminum PTASP6-F and compatible with many side mounted models such as the Tedea HOC model. Designed for platform scales, and hanging scales and found in packaging, dosing machines/filling and conveyor scales. The highest capacity single point on the market with a wide capacity spread from 100kg to 2000kg.
Add to this its ability to accept a platform size up to 1200mm x 1200mm makes this the ideal choice for a simple single cell platform. Complete with a C3 accuracy class and designed with minimal sensitivity to off-center loading common with single point use.