December 15, 2008 - The Toshiba Teli CSB1100CL-10 is designed to provide machine vision engineers with an economical, high-performance alternative to more expensive CCD-based monochrome cameras.Based upon a 1.3 megapixel CMOS progressive scan sensor, the CSB1100CL-10 redefines value with its razor sharp 1240 x 1024 resolution and 22 frame-per-second capture of fast-moving subjects. It is an ideal solution in a variety of challenging machine vision applications, including factory automation, OCR/DCR reading, inspection and quality control.
In addition to delivering excellent resolution, the CMOS sensor heightens the camera's spectral response and raises its signal-to-noise ratio to 47dB.To save the operator time and money, the CSB1100CL-10 also incorporates the CameraLink™ interface for digital 10-bit output. The interface assures interchangeability of the CSB1100CL-10 with other CameraLink products utilizing a common connector, cable and pin assignment.The CSB1100CL-10 features Toshiba Teli's patented Windows Of Interest (WOI) capability, allowing up to 16 areas within a screen to be set by the user, resulting in dramatically increased frame rates suitable for extreme high-speed processing.
Areas are read out by designating horizontal and vertical addresses.Other value enhancing features of the CSB1100CL-10 are global shutter mode that exposes all pixels simultaneously with little or no blurring, random trigger shutter mode, and a wide dynamic range to capture both high and low intensity subjects at the same time despite a large difference in contrasts. The CSB1100CL-10 is immediately available.
