The FPC1025 sensor version is the fourth addition to Fingerprints’ access control portfolio, which focuses on offering biometric performance and enabling a variety of form factors.

The NB302411-series NEMA enclosures are weatherproof enclosures for use in both indoor and outdoor applications. Constructed from molded fiberglass, these enclosures can be used as electrical junction boxes in high temperature or corrosive environments providing protection to equipment and operators from indirect electrical contact.

ABB's AXW 5000 and 5800 motors are designed with higher power densities, constant cooling on variable speed drive applications to extend speed and power ranges, and reductions of heat in the surrounding environment.

The Outdoor Filterfan is a rainproof filter fan with an airflow suitable for outdoor weather conditions, which makes a rainhood unnecessary for most applications.

EXAIR's 1/2 NPT No Drip External Mix Atomizing Nozzles are available in a narrow angle flat fan pattern. They are for pressure fed applications with independent air and liquid control.

The TG5000 Gas Monitor helps personnel to work safely with confidence in a number of environments, offering a variety of gas sensor options and installation configurations.

All WE-CLFS filters have at least 65dB of peak attenuation, and come with UL and VDE certifications, which ensures safety requirements are already factored into the design. With 3 different types available: single stage, single-stage advanced, and two-stage, with options of with a rated current up to 20A.

The SlimLine Series is UL listed and provides cooling capacities from 1,130 to 5,120 BTU/Hr. Operating temperature range is 50 to 122 or 131°F—depending on model.

Designed for a temperature range of -20 °C to +60 °C, the Smart-Ex 02 can even be used in extreme conditions.

The digital VarioCAM HD series thermographic cameras from InfraTec are based on thermally and geometrically high-resolution microbolometer FPA detectors with up to (1,024 × 768) IR pixels

Eaton’s four-inch touchless tool resembles a plastic wrench and is intended to help medical workers grab door handles, turn faucets and push buttons on phones and other devices without touching surfaces.

The Miki Pulley BXR-LE brake is a power-off engaged brake that will hold the AGV in place when not in use.

In addition to the deTec4, the Minneapolis facility also produces zone control modules for roller conveyors, various photoelectric sensors, fiber optic sensor heads, encoders, and sensor brackets, reflectors, and other assorted accessories.

This programming software is built on the concept of Blockly, an open-source visual coding method that presents programming language or code as interlocking blocks.

Both models deliver 10kg maximum payload and standard cycle time of 0.39 seconds (YK610XE-10) or 0.42 seconds (YK710XE-10).

The fault detection and classification system (FDC) is called Dynamic Fault Detection (DFD) in the cloud. It establishes trace references dynamically and does not rely solely on the traditional control limiting methods.

With its size, the nanoScan3 opens up potential applications where space is critical, such as in mobile intralogistics, collaborative robots (cobots), or mobile assistance and service robotics on autonomous transport platforms and carts.

The LR2 line reactor series adds seven frame sizes to match all GS, DURApulse and WEG drives. VTF series output filters combine line reactor and resistor-capacitor filter circuit to provide protection against voltage wave reflection, especially on long motor cable runs up to 1,000 feet.

The series of metal face proximity sensors is designed to withstand the harsh conditions of typical automotive welding processes with a fluororesin coating that provides increased spatter resistance.

The 20 kg payload HC20XP collaborative robot is suited for applications where robots need to safely work with, or in close proximity to humans.