Testing proved that AIM and JBBS junction boxes can withstand hot steam jet cleaning per EN 60529 and DIN 40050-9.

EtherStax I/O now has high density channel-isolated discrete I/O with redundant communication and power for use in critical applications and harsh environments.

Easy-I/O software for FPGA chips allows SERCOS III to be integrated into basic I/O slave devices with minimal development and integration effort.

J4/J5 joysticks for heavy-duty use are available in analog, digital, PWM and CANbus output versions. All resist EMC interference.

The NCS has been running since February 2005 in an environmental chamber at temperatures up to 221°F to prove it will work in Middle Eastern applications.

Cube67 distributed I/O modules are available with digital, analog and serial signals. Each digital channel can be user-configurable for input or output operations.

RIDERSERIES II relays include base sockets and industrial relays that can switch loads up to 16A at 24VDC or 230VAC for power or signal switching.

Model 8714 has eight high-speed inputs and eight digital outputs. Inputs can be independently configured as pulse counters, quadrature counters to measure position, or for frequency measurement.

RUM series Modbus gateway provides communication between Ethernet and serial Modbus devices. Five DAQ modules support Modbus.

DNA-GPS GPS receiver system adds GPS technology to PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time. Price is $495.

Mosaic added signal conditioning to its 2 x2.5 in. Wildcard embedded controllers, providing interfaces to analog sensors and actuators. Two mezzanine boards offer 4 channels of 4-20 mA inputs, 4 channels of 4-20 mA outputs, and 4 channels of 0-10V I/O.

DRS26 CoreTech Incremental Encoders are now programmable, allowing users to freely program the width of the zero pulse and the number of lines from 1 to 8,192. This allows users to replace multiple encoders with a single type of encoder that can be programmed at any time, in any location, for any application.

Edgeware now comes with DualConnectPlus, which provides filtering of string, RFID, and barcode data while extracting the barcode and RFID parameters. It can simultaneously connect serial and Ethernet devices to PLCs and applications.

ILIM-7 Interface Module offers 8 isolated high-resolution, 16+ bit, universal bipolar analog inputs. This allows IntelliLogger models IL-80 and IL-20 to increase channel count to a possible 128 total inputs. IntelliLogger is a self-contained autonomous data collection and Web page server.

The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

MAE3 miniature absolute magnetic kit encoder provides shaft position information over 360° of rotation with no stops or gaps. The magnetic encoder can mount to an existing shaft to provide digital feedback information.

Socket iWiFi secure serial-to-WiFi embedded device server connects devices running machine-to-machine (M2M) applications to 802.11b/g wireless LANs and protects them from network attacks.

The 750-340 series bus coupler can be used to connect local or distributed I/O on a PROFINET industrial Ethernet network.

The Bristol ControlWave Micro Hybrid RTU supports larger applications with dual Ethernet ports that provide network segmentation without the need for external routers.

The R35i has TTL output resolution with up to 8192 cycles per revolution, (32768 counts per revolution with quadrature).