EM-9640 mini-ITX embedded motherboard supports ultra low power AMD Geode NX processors, including the AMD Geode NX1500 @ 6W and the Geode NX 1750 @ 14W, and is suitable for graphics-intense digital signage and panel PC applications.

The SQ2010 is designed for mobile data logging applications such as field research and engineering projects. This data logger is very easy to set up and use via its intuitive icon driven display and integral four button operator interface.

The e-stop station comes with a red actuator and a yellow enclosure to meet international and domestic requirements. The red switch on a yellow background normally reserved for e-stops meets OSHA, NFPA 79 and ISO 60204-1 requirements.

PCI-5152 general-purpose digitizer converts a desktop PC into a full-featured oscilloscope. PCI-5105 eight-channel, 60 MS/s, 12-bit data acquisition board is ideal for building high-channel-count systems in application areas such as linear and phased-array ultrasonic NDT.

Platform for Secure Networking (PSN) now supports NextHop Technologies GateD advanced layer 3 IPv4 and IPv6 routing software.

Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications

UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply.

The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better.

The AS5140H 10-bit rotary encoder IC is qualified to AEC-Q100 and designed for applications in an ambient temperature range up to 150°C. With a resolution of 0.35 degrees, it can recognize 1,024 positions within one 360° turn, and is accessible with either a serial or a PWM (Pulse-Width Modulation) interface.

TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

User-configurable FPGA modules feature conduction cooling and differential digital I/O at a cost that is suitable for many mid-level computing functions. The modules provide the ability to configure custom I/O boards using application-specific instruction sets..

The SNAP-PAC-EB1 and SNAP-PAC-EB2 I/O Processors have dual, switched 10/100 Mbps Ethernet interfaces. This built-in two-port Ethernet switch design lowers network equipment costs by making it possible to build multi-drop I/O networks over standard Ethernet cable.

MIC-3723, a 3U CompactPCI 16-bit 8-channel non-isolated analog output card, starts at $695. Each analog output channel is equipped with a 16-bit double-buffered DAC and has an auto-calibration function and BoardID switch.

The USB-503 logs up to 32,510 voltage measurements over a 0 to 30 VDC measurement range. The USB-504 logs up to 32,000 current loop measurements in the 4-20 mA range. The tiny USB-501-LT logs up to 4,080 temperature measurements in the 14 to +122 °F range.

Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.

The 58 mm diameter industrial grade metric incremental encoder is available with either a standard 10mm shaft or 6mm shaft. The M58 provides resolutions up to 80,000 cycles per turn, resistance to shock and vibration, and IP65 environmental protection. IP67 is available with a sealing flange.

Type-590X current-to-pressure transducer is small in size and light weight, yet is less sensitive to shock vibration and position change than most other I/Ps. It can mount in any position and is impervious to RFI/EMI interference.