The services support the full spectrum of ICS/OT/IoT maturity, from early-stage IoT adoption, health checks and strategy validation, to full-lifecycle risk management.

Developers can plug the CPU module into their motherboard and configure it with the PCAN-MicroMod FD Configuration Windows software included in the scope of supply.

The volume of cyber security threats within critical infrastructure environments is rising and continues to pose significant human safety and financial risk. Cisco is delivering security by converging the IT and OT within security operations centers to provide advanced anomaly detection with built-in threat intelligence.

At 2 inches wide and 3 inches high (40 sq. cm), the HI 6200 series are designed for machine level integration in process skids or manufacturing equipment. A color TFT display provides operations and measurements and instrument status.

The joint solution from Ixia, a Keysight business, and Nozomi Neworks includes an Ixia Vision network packet broker (NPB), which collects data from all locations connected to an operational network and delivers it to Nozomi Networks Guardian for real-time processing and analysis.

The software unlocks the data typically siloed in individual coordinate measuring machines (CMM) to provide real-time insight into the performance, use and status of multiple CMMs across one or several sites.

With the release of PortBloque E, Sequi is adding Ethernet firewall functionality and Modbus TCP/UDP deep packet inspection tofilterand block harmful and unwanted Modbus traffic. These capabilities make the PortBloque E a choice for automation, utility, and energy operators looking to protect serial Modbus devices from Internet attacks.

WAGO is collecting data to its cloud and was looking for VPN connectivity for up to thousands of sites and users. Secure remote connection and access management was required for distribution of limited access rights to various third parties.

By combining OPC UA and IO-Link, Pepperl+Fuchs has opened up possibilities for end-to- end, transparent, communication from the lowest field level to the cloud.

The KGEA-MRHPM Series (mid-range antennae) have been designed to reduce the number of antennas compared to the total number short antennas with equal or better performance reading distance and H-field around the whole vehicle.

TOSIBOX Lock for Container is a software-only solution comparable to Tosibox’s previous hardware TOSIBOX Lock products. It enables users to integrate Linux-based IPCs, HMIs, PLCs, controllers or other devices into their TOSIBOX ecosystem and provide secure VPN connectivity to the host device where it is installed, and access to the LAN side devices connected to the host.

Lanner and Dispersive Networks have tested and validated an integrated solution that combines Lanner’s universal CPE equipment and Dispersive Networks’ flexible NFV and Container-based SD-WAN programmable networking software.

EXOR has designed the product range as Industrial IoT edge devices combining a controller with networking capability and outstanding communication options including client/server OPC UA. They are a choice for all demanding IIoT edge applications in extreme environments such as marine and process industries.

WirelessHART Vanguard Gas Detectors interface with existing networks to provide continuous coverage while working to reduce the cost of detecting toxic and combustible gases

The NCA-6110’s specs include its support for up to 512GB DDR4 2666MHz ECCR-DIMM, dual GbE RJ45 ports, 4x or 2x 3.5” or 2.5” swappable bays, 1x RJ45 console port and 2x PCIe*8 FHHL or 1x PCIe*16 FHFL.

AMCI’s SV160E2 Integrated Servo Motor includes an integrated dual port switch with EtherNet/IP, Modbus-TCP, & Profinet connectivity. The SV160E2 incorporates a servo motor, drive, and controller in a single unit.

The Flexy gateway pulls data from any supported PLC from ABB, Rockwell, Siemens, Mitsubishi, Omron, Eaton and others. Canary’s Enterprise Historian is configured to pull PLC data from Flexy’s embedded OPC-UA server, and data flows automatically from Flexy directly to the Canary Historian.

The MRD-455-NA is well suited to industrial applications where machine to machine communication is vital. It has a design with all interfaces and LEDs at the front, DIN-rail mounting, isolated power supply and an operating voltage range spanning from 10 to 60 VDC.

The transmitters are available with an integrated Bluetooth interface that enables users to wirelessly display measured values and perform configuration tasks. The device is operated using Endress+Hauser’s SmartBlue app.