- Phoenix Contact
The PSRswitch offers an RFID non-contact safety door switch system with M12 connections. The safety switch can be connected in a series with Y distributors, bridge plugs, and SAC cabling.
- Fluke Corporation
Fluke is adding condition monitoring data to IBM Maximo with Integrated Condition Monitoring for Maximo, a solution that incorporates real-time asset data within existing IBM Maximo workflows.
- AKZO Nobel Chemicals SpA
The small portable device can scan color on any object. It then links to a Color Sensor app which provides the paint color match.
- IBASE Technology Inc.
The embedded CSB200-818 houses a 3.5-inch single board computer powered by an Intel Atom processor E3930, N4200 or N3350 and is equipped with 4GB (default) of DDR3L-1866 system memory that is upgradeable to 8GB.
This 2-watt unit operates on 30V DC and provides 200k ohm resistance. This device is used to support vehicle steering systems.
Marktech Model MTE6063M-UHR visible red LED emitters offer output power, typically 27.5 mW, along with a radiation pattern, and a peak emission wavelength of 630 nm.
These capacitive sensors are suitable for detecting the presence of solids, but are equally good at detecting material or liquids like granulates, sugar, oil, and aqueous media through a nonmetal wall, such as packaging, glass or plastic, with a maximum thickness of 4 mm.
Common applications include maintenance and troubleshooting of gauges, switches, transmitters, transducers, valves, gas meters, flow computers, pumps, and filters. The HPC50 can also replace a deadweight tester.
- HEMCO Power & Control Systems Limited
HEMCO ModuLab is a custom-designed room enclosure with control systems that meet a variety of environmental and class clean requirements. ModuLab is a choice for industrial applications such as Powder Coating, Food Processing, Seed Production, Mining, and Bulk Solids Handling.
EVT‚Äôs Label Alignment and Position Inspector checks the position and the alignment of the previously defined label. The parameters are defined by the user. Afterwards the inspection can be applied immediately to the production process.