A feature of Yamaha Motor’s vision system is its integration with robots by incorporating a vision board, lighting board, and tracking board in the RCX3 series multi-axis robot controller.
- Matrox Imaging
Matrox AltiZ 3D profile sensors have a dual optical-sensor design and data-fusion capability, which offers 3D reproduction fidelity through their ability to combat occlusion and outlier data.
This point-to-point wireless signal bridge takes analog, discrete, or Modbus signals at one location and reproduces them at a second location.
- Endress & Hauser
The sensor can be used in a range of applications; for example, turbidity measurement in processes within the chemical industry, concentration measurement of hot process water in the food industry, and solids measurement in industrial wastewater.
- FCI - Fluid Components International
The AS-LLE Point Level Sensor can be used with most any liquid, including water, oil, hydraulic fluid, coolants, and more.
CUI offers the AMT series encoders with configurable pulses per revolution (PPR). The PPR can be set for most models using the free AMT Viewpoint software (the AMT10-series encoders are configured using DIP switches).
- OleumTech Corp.
The OleumTech H Series Smart Pressure Transmitters (PT’s) are intended for industrial markets including petrochemical, chemical, power, upstream oil & gas, and wastewater.
- SICK, Inc.
With the measurement of compressed and non-corrosive gases, it displays three parameters at once by measuring the flow, pressure, and temperature.
LA-9.5 series miniature AC-LVDTs operate from a nominal 3 Vrms, 2.5 - 3.3 kHz excitation source. They are packaged in a 0.375 inch (9.5 mm) OD SS housing with 12-inch leads and are offered with either an imperial or metric threaded 0.110 inch (2.8 mm) diameter core that works in a 0.125 inch (3.2 mm) ID bore.
ST’s n rad-hard rectifiers and Schottky diodes are guaranteed by characterization to resist a total ionizing dose (TID) up to 3 Mrad (Si). The voltage drop is guaranteed at four values of operating current to let multiple different power-supply designs use a single device type.